[an error occurred while processing this directive]
Posted by brian on September 13, 2010 at 04:50:02:
In Reply to: Boiler sizing help posted by Brian on September 13, 2010 at 04:45:46:
: I am considering converting my steam boiler from gas to oil. ***Corrected I meant to say converting from oil to gas ***** the label on my boiler indicates that it has a gross output of 173,000 BTU and 541 sq ft of steam.
: My home is only 1400 sq ft located in upstate NY. Although not super insulated a 173 BTU boiler seems quite high.
: Calculating my radiator sizing I need 360.6 sq ft of steam @ 240 sq ft =86,500 BTU
: Looking on the W-M website I see the following...
: If I understand all the ratings correctly to replace my boiler size would require a W-M EG 55 (200MBH input, 167 DOE and 125 EBR)
: The available sizes from W-M are
: EG 35 = 62 MBH IBR (Smaller than my radiator capacity)
: EG 40 = 78 MBH IBR
: EG 45 = 94 MBH IBR
: EG 50 =109 MBH IBR
: EG 55 = 125 MBH IBR (closest to my currently installed model)
: Can anyone recommend which model (size) boiler I should purchase?
: Thanks in advance!