[an error occurred while processing this directive]

Re: Weil-McClain Intermittent Ignition


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Forum #4 ] [ FAQ ]

Posted by Joseph2309 on April 08, 2008 at 21:10:20:

In Reply to: Re: Weil-McClain Intermittent Ignition posted by Joseph on April 07, 2008 at 22:34:46:

I looked at the troubleshooting chart and see it reccs replacing the gas valve as the next step in troubleshooting (although they don't deal with intermittent operation).

I got the model number off the valve and did some research. My plan now is to replace the obsolete White Rodgers 36E36-267 with the recommended replacement 36E36-304. Looks like a straightforward job. I located one for $90.

What do you think?


: : If you have cleaned and tightrened all electrical connections, then, the troubleshooting chart at:
: : http://www.weil-mclain.com/downloads/obsolete/heii/heiihsi.pdf
: : says to call the Weil McLain rep; this might require a module change.

: Thanks - I am going to check the gas pressure, too. Last year our area was converted to a high pressure gas (i.e. gas reg at each home) system. Maybe gas pressure is low. Our HW heater and stove work fine though.

: The electrical connections are all plug connectors. I guess I will unplug and replug and see if that does anything. Then I will call for service.

: Thanks again...

: Joe





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Forum #4 ] [ FAQ ]