[an error occurred while processing this directive]
Posted by Joseph on April 07, 2008 at 22:34:46:
In Reply to: Re: Weil-McClain Intermittent Ignition posted by HeatPro on April 07, 2008 at 22:26:54:
: If you have cleaned and tightrened all electrical connections, then, the troubleshooting chart at:
: http://www.weil-mclain.com/downloads/obsolete/heii/heiihsi.pdf
: says to call the Weil McLain rep; this might require a module change.
Thanks - I am going to check the gas pressure, too. Last year our area was converted to a high pressure gas (i.e. gas reg at each home) system. Maybe gas pressure is low. Our HW heater and stove work fine though.
The electrical connections are all plug connectors. I guess I will unplug and replug and see if that does anything. Then I will call for service.
Thanks again...
Joe