[an error occurred while processing this directive]
Posted by Jeff on September 27, 2009 at 20:26:43:
In Reply to: Re: Sludge in sight glass and in valve below posted by HeatPro on September 27, 2009 at 19:57:25:
I forgot to mention that I was able to clean the sight glass and the valve somewhat and reinstalled. However, since the valve was open, shouldn't water have come out? I guess either the valve is still plugged or there is not enough water in the boiler. I guess I'll drain the boiler and try to refill but if the valve is still plugged, can the boiler be over filled?
Post a Followup