[an error occurred while processing this directive]
Posted by Oskar Bosch on January 20, 2008 at 10:07:16:
Burnham revolution series boiler leaks about 2 gallons in 8 hours via the pressure regulator valve (on top). The valve is just replaced as it was suspected leaking, but that did not solve the problem.
What can cause this overpressure all the time?
Tried to shutoff the water intake to see if it got too much pressure via the water inlet. But that did not make much difference. Of course it started to leak less as there was less water in the system after a while, but that does not seem a good mode to run this boiler in. Any suggestions?
Thanks, Oskar