[an error occurred while processing this directive]
Posted by Charlie on November 01, 2007 at 09:38:51:
I am trying to get the water level set in my steam boiler. The level was getting too high, system was flooding, and I started playing with the knobs (shown in this picture: http://www.stabilimenta.com/ebaypics/balancing.jpg). The bottom knob leaks unless it is all the way open or closed. So I set it fully open. Then I adjusted the top until I was able to get some of the water out of the system without the automatic feed kicking on. It's now about an inch from the bottom of the glass tube. It seems to be working, but I'd like some idea of how this is SUPPOSED to be done! Thank you, thank you.
Post a Followup