[an error occurred while processing this directive]
Posted by Dave on January 21, 2006 at 08:23:32:
In Reply to: Re: The plot thickens... posted by heatpro on January 20, 2006 at 18:55:31:
I spoke with Lochinvar tech guys who wanted me to wire it across R/W. The I called Beckett and spoke with one of their tech guys. I offered to fax/email the wiring diagram to him for my boiler, but he wasn't really interested in that. I looked into my boiler and there is the dial marked operating temp with a capillary tube. There are 2 wires attached to it. When I remove either, the boiler does not run. So I'd assume one of these is the one I must attach to the Heatmanager (one wire is red/white and one is either red or reddish orange.
If you wouldn't mind, which wires are we referring to on the diagram?
It is page 4 of the following link:
Post a Followup