[an error occurred while processing this directive]
Posted by Josh on November 21, 2012 at 13:09:21:
I have shimmed all my radiators. This is a first floor apartment, with furnace in basement. I feel I should replace all the steam vents, does anyone have a recommended brand? Also, the radiator nearest to furnace makes an odd slurping sound during the initial call after the heat has been off for a while. The vent from this slurping radiator vents in conjunction with the slurping. I have replaced this vent with a new one, but have not on the other radiators. I have ensured the water level to be correct. The furnace reads 4-5 psi when operating, I have read it should be 1-2 psi, the cut in is set to minimum, I think 0.5 psi, I do not know how to lower the operating pressure. Any help is appreciated.
Post a Followup