[an error occurred while processing this directive]
Posted by HeatPro on October 11, 2011 at 13:39:00:
In Reply to: Removing Boiler and Radiators posted by Mike on October 11, 2011 at 11:37:19:
Make sure the boiler feed water valve is shut. After shutting off power to the burner controls on the boiler, open the boiler drain on the boiler bottom, open vents or vent plugs at the top of the system; the water will drain out. When the system seems to be out of water, look for plugs at the bottom of parts of pipes that could trap water and open them to drain more water.
Then you can cut and remove as you will. You could just start cutting; but you might not like the bath, and cutting without draining could be fatal with a connected sawzall.
Post a Followup