[an error occurred while processing this directive]
Posted by HeatPro on June 01, 2010 at 19:34:14:
In Reply to: Re: Peerless WBV 4 section posted by headstamp on June 01, 2010 at 12:08:42:
: So basically you are saying there is no longer a concern about flow rates through the zone piping?
Can't be absolutely sure until you verify that the written estimated heat loss of the house is less than 150,000 btuh. If so, then there is no concern about the flow rates through as many zones as you can pipe in the house with maximum circuit lengths around 150 feet each or less.
Post a Followup