[an error occurred while processing this directive]
Posted by HeatPro on January 06, 2010 at 11:08:07:
In Reply to: Re: Replace PI with Millivolt? posted by tk03 on January 05, 2010 at 09:22:03:
: The reason the newer boiler is not millivolt is manufacturers cannot build them anymore due to not meeting minimum government standards.
True, the minimum efficiency of 78% for steam and 80% for water and air keeps the standing pilot out of machines. There are millivolt units made for special circumstances where efficiency ratings aren't a requirement for that application.
http://www.raypak.com/jumpPool.cfm?target=raypak_millivolt.htm