[an error occurred while processing this directive]
Posted by Peter Bleich on October 28, 2008 at 18:29:50:
I replaced the temp/pressure gauge on my ancient Red Flash boiler. I drained the system first, replaced the guage and filled the system several days later. The radiators have been blead. I now have a leak in the upper inside area, visible when looking in throught the top door. Roughly 1-2 oz pool on the ledge, if removed the pool reappears in about 24 hours. My pressure is holding at about 14 since the new gauge was installed. Are there any fixes or remedies here or is the boiler shot? Never noticed a leak before (moved here 1 yr ago., furnace worked but innefficiently). Can it be run as is, are there any fixes or ideas for this issue? Thankyou.
Post a Followup