[an error occurred while processing this directive]
Posted by andy on April 17, 2006 at 17:48:08:
I've recently changed the diverter valve on my worcester240 boiler and now only get the slowest of trickles of hot water. The plunger that activates the microswitches does not move when the hot tap is turned on, although as far as I can tell, the cold water inle pressure appears OK. When the tap has not been run for a while and is then turned on, the water comes through at a reasonable pressure, but then fades within a few seconds to a trickle.
I'd be very grateful for any help or suggestions.
Post a Followup