[an error occurred while processing this directive]
Posted by Joe on January 24, 2006 at 12:32:07:
Hi, I have a base board heat system. I have to replace one of the baseboard heaters. There is no release air valves at any of the base board heaters. There is 3 seperate zones to this system with manual shut off valves to let the water from boiler go thru. There is 2 water spout type valves in system that looks like a garden hose will connect to. One is at the boiler just before the water returns in and one is in the same return line but all the way at the top almost against the floor. What and how would be the proper way for me to get all the air totally out of this system? Thank You.