[an error occurred while processing this directive]
Posted by Bill on January 05, 2006 at 20:58:51:
In Reply to: Short Recycling Periods posted by Bill on January 05, 2006 at 20:37:32:
After reading a previous post, I'm wondering if the problem might be the flow rate and only some of the heat might be getting out of the boiler.
If it helps, the circulator pump is on the return side. It is a Taco Cartridge Circulator, Model 007-F5. Maximum pressure is 125 psi and Maximum water temp is 240F.
Thanks again for any help...
Post a Followup