[an error occurred while processing this directive]
Posted by george on February 05, 2005 at 07:10:00:
In Reply to: Re: cold radiators and hammering posted by Dave Wasserman on February 04, 2005 at 13:41:12:
Just put a bucket under the purge
valve, with the furnace not
running and lower the level
to no less than 1/2 the site
glass. There is a lot of histerisis
in the water movement. The water
filler should cut in if you moved the
level too low.
How often do you purge the sediment
from the boiler?