[an error occurred while processing this directive]
Posted by kraig on July 28, 2004 at 13:25:57:
We have a 250 lb. steam feed pipe going into our turbine. On the bottom of that pipe there is a condensate drain pipe, 1 inch diameter going into our condensate return system. First there is a screen, then a Watson McDaniels turbo disc trap which is rated up to 600 psi. There is a pile of steam blowing out of the roof from this line, I can isolate it enough to be 100 % sure. Is this configuration right or must there be something different, the trap is new also, thanks.
Post a Followup