[an error occurred while processing this directive]

Posted by Bob D on March 15, 2004 at 09:06:04:

In Reply to: Fuel oil tank calculations posted by Tony on March 15, 2004 at 07:34:54:

For a round tank, with a flat bottom, the volume per inch is found by:

(Tank Diameter in feet) x (Tank Diameter in feet) x 0.4896 = gallons per inch of tank height

For example, a 4 ft diameter tank holds:

4 x 4 x 0.4896 = 7.833 gallons per inch of height

I've rolled all the little conversion factors into the 0.4896 term.

- Re: Fuel oil tank calculations
**Tony***05:42:00 3/18/2004*(8)- Re: Fuel oil tank calculations
**tom***06:57:08 3/18/2004*(0) - Re: Fuel oil tank calculations
**tom***06:49:00 3/18/2004*(6)- Re: Fuel oil tank calculations
**Bob***06:30:06 3/19/2004*(1)- Re: Fuel oil tank calculations
**Tony***13:51:04 3/19/2004*(0)

- Re: Fuel oil tank calculations
- Re: Fuel oil tank calculations
**Tony***05:54:40 3/19/2004*(3)- Re: Fuel oil tank calculations
**BoilingMan***09:15:36 3/26/2004*(2)- Re: Fuel oil tank calculations site
**BoilingMan***09:23:02 3/26/2004*(1)- Re: Fuel oil tank calculations site
**Tony***13:09:18 3/26/2004*(0)

- Re: Fuel oil tank calculations site

- Re: Fuel oil tank calculations site

- Re: Fuel oil tank calculations

- Re: Fuel oil tank calculations

- Re: Fuel oil tank calculations