[an error occurred while processing this directive]
Posted by James on March 12, 2004 at 09:52:24:
In Reply to: Flash Tank Vent Connection posted by James on March 11, 2004 at 09:45:17:
Bob, thank you for the helpful information. I failed to mention that we have a new SENTRY spiral heat exchange in place and it is piped to preheat make-up from 46 degrees to approx. 140 degrees, it really does a good job. My blowdown controllers are set up to do “timed” blowdown sampling vice continuous, due to the amount and quality of our condensate return (94-97%), and make-up. Thanks again for the information.
Post a Followup