[an error occurred while processing this directive]
Posted by HeatPro on January 17, 2007 at 09:29:33:
In Reply to: pilot keeps going out posted by jasper on January 17, 2007 at 06:36:20:
well it may or may not be the thermocouple below is just some of what it could be.
1)Pilot flame
first you need to check that the pilot is on(lit)has it a correct size and flame pattern and is playing the thermocouple in the right place there is a hot and a cold spot on a thermocouple and it will not work if the cold spot is heated or the hot spot cold
2)Thermocouple may not be given right voltage
3)magnetic valve faulty
4)contacts could be dirty stoping voltage
5)interlock like The E.C.O. may have failed or operated
6)pilot flame may blow out from the main burner lighting or turning off (pilot in wrong place)
7,8,9....... and so on and on