[an error occurred while processing this directive]

Re: Wiring Honeywell V8043E with taco 007 and Honeywell RA832A Relay


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Forum #3 ] [ FAQ ]

Posted by Chris on September 19, 2006 at 16:14:29:

In Reply to: Re: Wiring Honeywell V8043E with taco 007 and Honeywell RA832A Relay posted by Chris on September 19, 2006 at 15:48:52:

: : : Go back over the information above, read it til you understand it, and you will find you've had the information you asked for three times over.

: : ok, I will look at the long complicated answer to the simple question "where do the two reds and two yellows go on a SR501-1"

:
: Ok, I took a look at your first reply. In it you state to go to the transformer with one yellow etc.. I got that, I think. The reason I bought, or so I was told, the 501-1 is that I do not need a separate transformer. As the 501 has one built in. Is this correct?

Spoke with TACO, need secondary transformer. He recommended the same three zone valve relay you did. Ordered it. Thanks.





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Forum #3 ] [ FAQ ]