[an error occurred while processing this directive]
Posted by HeatPro on May 06, 2006 at 08:28:29:
In Reply to: Re: wiring of off-delay timer posted by HeatPro on May 06, 2006 at 00:15:05:
: Currently, I have a hot wire that is always on to term. 7. and a neutral wire to term 2.
+++ That shouldn't be. The hot wire to terminal 7 is the control wire that starts and stops the pump by applying and removing power to the coil of the time delay relay to make the relay contacts between 1 and 3 close and open (after the delay. AND after any other relay [if one] removes power from the circ.)