[an error occurred while processing this directive]
Posted by janine on March 14, 2004 at 23:18:47:
In Reply to: Re: central heating turning off posted by Harold hydronicnetwork.net on March 14, 2004 at 13:53:22:
: Turning the power off and putting it on again resets the board. You are having a safety device lock-out, so all sensors need cleaning and terminals need cleaning. Pressure settings need verification. Beyond that, it could be a board problem.
I did forget to mention that when heating turns itself off it seems to happen when used lots of hot water.
Post a Followup