Posted by THEO RAHAN on November 19, 2001 at 07:07:35:
In Reply to: Peerless boiler/Riello burner won't engage posted by Craig on June 01, 2001 at 19:26:35:
: I have a Peerless WB-3 boiler with a Riello 40 oil burner. I'm a new homeowner and I let the oil run out; I now have no hot water. After an oil drop, I hit the reset button, but the system only kicks on for a few seconds tne shuts off. Any ideas before I have to call a service tech? I'd hate to call a pro then find out I just had to do something very simple. Any help is much appreciated.
: Craig.
TO : CRAIG
FROM : THEO RAHAN
SUBJECT: BURNER WON'T ENGAGE
CRAIG, YOUR GOING TO NEED THE OIL
LINE THAT FEEDS THE BURNER CLEANED OUT.
IT'S DONE BY CO2 CARTRIGES,YOU MAY ALSO
HAVE TO HAVE A NEW FILTER INSTALLED. IN
THE FUTURE DON'T LET TANK GO BELOW 1/4
FULL.
GOOD LUCK,
THEO