Posted by Dominic on July 21, 2001 at 14:46:29:
In Reply to: Re: Bleeding the system posted by But Harold, the spout with the cap is on the CITY WATER SUPPLY valve. on July 19, 2001 at 11:54:37:
Harold thanks I dont know why my message got posted so many times.
I have refilled the system and I have one more question.
when I filled it I used a hose (because my intake fills very slowly) the water was running out of the purge valve without any bubbles and the pressure was about 12 psi.
After I closed everything the pressure went to zero or maybe 2.
Why did the pressure dropped so low? Could it be that there is an expansion tank on the system? or I have a leak I dont know (I doubt it though).
Post a Followup