Re: antifreeze in hydronic systems


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Steam-Forum ] [ FAQ ]

Posted by talmage w. shill on January 24, 2000 at 10:43:15:

In Reply to: Re: antifreeze in hydronic systems posted by Loretta Donnelly on January 17, 2000 at 15:17:17:

: My husband and I have researched this as well. It's great to have antifreeze in the pipes in case there is a prolonged power outage.

: Here's what contractors have told us:
: -Make sure you have a backflow prevention valve installed so that your drinking water will not be contaminated by the antifreeze.

: -Cryotech makes a good antifreeze for hydronic systems. (You cannot use the automobile stuff!)

: -It is recommended to have the antifreeze pumped in.

: -Only do this if you really know what you are doing. All air must be bled out of system, and proper antifreeze must be used to prevent pipe corrosion.

: -It is recommended to drain out and replace the antifreeze after 3-5 years, because its antifreezing properties degrade over time.

: We are going to hire avprofessional for this and really watch and ask questions so we can do it ourselves next time. We do a LOT of work on the house ourselves, but every heating system is different and one little mistake can really be costly!

: Just a few thoughts.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:


[ Follow Ups ] [ Post Followup ] [ Boiler Room Residential and Home Steam-Forum ] [ FAQ ]