[an error occurred while processing this directive]
Posted by Mike Bara on January 28, 2002 at 20:23:12:
In Reply to: Anyone else concerned posted by Steve on January 27, 2002 at 06:27:15:
As A Boiler inspector in NYC I have seen the same thing happen. But what my agency did was that we changed our license law requirement. Any boiler over 15psi and that has a waterside heating surface over 100sqft requires a licensed ststionary engineer. This allows the dry cleaning stores to have a 10 or 15 horsepower high psi with out a license but a hospital or factory who trys to put say 10 15horsepower fulton in is out of luck. Sorry to say at this time we dont have a low psi license or a special high psi license for the fulton boilers. I know that in New Jersey anything over 6hp needs a license.
Post a Followup