Boilerroom.com Visitors Guestbook

GOLD CORPORATE SPONSOR
Unilux Advanced Manufacturing
Click Here To Learn More About Unilux Boilers.

We are pleased to provide our Internet services to companies worldwide. Please take a moment to fill out our guestlist, we would like to hear from our visitors.

If you need help with a technical issue or question, please post it on our Boiler Room Steam-Forum, please restrict the guestbook to greetings and comments only. We no longer accept entries that are "free plugs" for another service and reserve the right to remove any listing at our discretion with no notification.

Click here to add yourself to our guestlist

From this point forward we must regrettably restrict any messages that reflect a "free plug" or are not applicable to a guestbook, message removal is at our discretion. We present a free Manufacturers Representative and Service Company Database and offer other advertising options for manufacturers and other companies.

New listings to the guestbook are temporarily offline due to automated spam programs that continue to crash our system. It is seriously weak that people have nothing better to do than paste their filth on a website that tries to provide a service to an industry at no cost. We're no Ebay or Amazon, we do not have an IT staff to fight these people. We apologize but the spammers adapt their tactics to every change we make. We don't know when we'll have everything back up but until we have a solid defence we have to take the guestbook offline.

Cool site. Very helpful.
Kevin O'Donnell
Pearl River, New York United States - Sunday, December 26, 2004 at 12:50:33 (PST)

Very nice web site .. informative.
John Sharkey
Oswego, New York USA - Tuesday, December 21, 2004 at 17:29:06 (PST)

Nice! I will come back again.
Schulz Corey
Bloomington, ILL USA - Friday, December 17, 2004 at 06:09:16 (PST)

Great website! Enjoyed three and a half years steamin' a 600lb plant aboard USS Wasp (world's greatest warship!), operated coal fired, bark burning and package boilers for another three years. Currently an operator at 3-on-1, 860mw combined cycle plant. Just another wonderful day in paradise! Keep on steamin'!!!
Joe Haynes
Rincon, Georgia United States - Wednesday, December 15, 2004 at 11:48:33 (PST)

I start up most all boiler/burners
Jerry L Akins
Seattle, Washington United States - Tuesday, December 14, 2004 at 10:08:30 (PST)

William Grubs, Saw your Guest book post. Can you Email me? I may be able to help you out. Charlesgordon_2000@yahoo.com
Charles Gordon
Bremerton , Wa. USA - Tuesday, December 14, 2004 at 09:20:00 (PST)

boiler operaters liscense
Edward Smolar
west patterson, new jersey USA - Monday, December 13, 2004 at 07:24:15 (PST)

I'm looking for a boiler company that can to sale home gas boilers from Peru.
Carlos Navarro
LIC, N,Y USA - Sunday, December 12, 2004 at 10:25:40 (PST)

Great site! I will come back again.
Schulz Corey
Bloomington, ILL USA - Wednesday, December 08, 2004 at 22:16:55 (PST)

BOILER/BURNER TECH. FOR THE PAST 16 YEARS. 3RD CLASS ENGINEER IN OHIO FOR THE LAST 12. CURRENTLY DO TRAVELLING TROUBLESHOOTING AND CONTROLS ON HIGH PRESSURE STEAM GENERATORS. SPECIALIZE IN VAPOR MODULATICS...YOU NAVY GUYS KNOW THEM AS THE TEAPOTS WITH THE BUTTERFLY SERVOS...ANYBODY LOOKING FOR HELP WITH THESE UNITS CONTACT ME AT jmcmullen@midwestindservices.com NICE TO FIND A SITE WHER STEAMERS CAN HELP EACH OTHER!!!
JOE McMULLEN
CINCINNATI, OHIO USA - Friday, November 05, 2004 at 16:42:41 (PST)

I was a BT on the USS Piedmont-AD-17, USS, Donald B Beary, FF-1085, and finished up on the USS Forrestal, got out as a BT2. Now I am a Senior engineer in charge of a good sized powerhouse for a New York State Maximum security Prison... We dont get to go anywhere, but we are steaming 24-7-365! Would like to hear from any other snipes out there.
Edward Burkhart
Granville, NY USA - Sunday, October 31, 2004 at 06:08:35 (PST)

I am a welder by trade and now in my third year of Steam fitting. I find this site very interesting and useful. The information that is here is very good reading material and helpful knowlege. Wonderful site!
Matt Martens
Irma, Alberta, Canada - Thursday, October 28, 2004 at 19:09:03 (PDT)

REALLY VERY GOOD SITE WHICH IS SEARCH FROM GOOGLE.A LOT OF TECHNICAL INFORMATION AVAILABLE IN THIS SITE.
MANOJ PATEL
AHMEDABAD, GUJARAT INDIA - Tuesday, October 26, 2004 at 16:56:39 (PDT)

Would like to work for Newark Board of Education as boiler operator.I have Black Seal, but it seems impossible to get in the door. HELP!
Mickle Dunkins
Newark, New Jersey USA - Tuesday, October 26, 2004 at 05:44:58 (PDT)

Commissioning againt for new boilers nad old Boilers spair parts.
APURBA BOSE
KOLKATA, WEST BENGAL INDIA - Tuesday, October 26, 2004 at 02:34:04 (PDT)

thanks for posting such a great site,it has been very helpful in showing our new trainee's what the job entails.
william hedstrom
hackettstown, NJ USA - Sunday, October 24, 2004 at 20:42:20 (PDT)

Just surfed on in.....I plan on using a steam engine at my next home.I'm interested in reading about Boilers/Steam/Engines/ etc. thanks
Michael P. Koryciak
Flint, Michigan USA - Sunday, October 24, 2004 at 03:19:45 (PDT)

i need information about boiler
M asif adnan
faisalabad, punjab pakistan - Wednesday, October 13, 2004 at 09:03:14 (PDT)

i' making an assignment about material designation and numbering system in some steam boilers i wann so information about the perfect material that could be use in manufacturing steam boiler
Tariq Eltalhey
london, ENGLAND UK - Sunday, October 10, 2004 at 15:39:48 (PDT)

Thanks so much for the info, I love your site! Much success for the future orange and lake and country and club and kissimee
Orange Lake Country Club
Gatineau, Quebec Canada - Monday, September 27, 2004 at 08:02:22 (PDT)

I have been a boiler plant operator at Hemphill Pumping Station for 15 years, hold a 1st class GAPE license (expired). 5 years turbine room experience before that. We may be the last steam plant in the country to pump potable water in a major urban area. Cleveland OH was another but it closed years ago I believe. We could use some qualified help here. If you want to discuss boilers: nilla6 (at) mindspring (dot) com
William Grubbs
Atlanta, GA USA - Sunday, September 26, 2004 at 10:04:36 (PDT)

I am A member of NAPE#1 New York City.I just looked into your site.Great info Thanks Ralph
Ralph Giordano
Merrick, New York USA - Saturday, September 25, 2004 at 03:53:25 (PDT)

in terested in boiler designin
prasad
hyderabad, andhra pradfesh India - Saturday, September 25, 2004 at 00:52:18 (PDT)

This is the first time that I have been on the site. I must say that I was quite impressed. Keep up the good work.
Tammy Saling
Mountain Home, Arkansas United States - Tuesday, September 14, 2004 at 17:51:44 (PDT)

Looking for owners of boilers in Ontario, New York and Quebec.
J Peter Elliott
Oakville, Ontario Canada - Wednesday, September 08, 2004 at 09:09:29 (PDT)

Former boilerman in Navy.
E.T. Rushing
Shreveport, LA USA - Monday, September 06, 2004 at 19:36:37 (PDT)

HEY, JUST FOUND THIS WEBSITE. I HAVE ALMOST 20 YEARS IN THE NAVY AND WINDING MY TIME DOWN. ORIGINAL BT. STEAMED MOSTLY 600LB. PLANTS. AND 1 1200LB. PLANT. ALSO WOKED AS OIL KING AND STOOD ENGINEERING OFFICER OF THE WATCH ON LAST SHIP.
CHRISTOPHER.TELL
WAUKEGAN, ILLINOIS UNITED STATES - Wednesday, August 25, 2004 at 02:02:43 (PDT)

I work at Brighton Beach Power in Windsor Ontario, a 2 on 1 combined cycle facility.
Jeff Campbell
Windsor, Ontario Canada - Tuesday, August 24, 2004 at 23:01:59 (PDT)

Greetings and Salutations from KSC. George Broyles Heat Plants/ HTHW sytems Foreman
George Broyles
Kennedy Space Center, Florida USA - Friday, August 20, 2004 at 11:52:38 (PDT)

i'm a steam engineer working on board liqufied natural gas carrier ship.i have an experience in boiler and steam turbines operation.i would like to know more about steam engineering.
HANIFF BIN AHMAD DARKI
JOHOR BAHRU, KUALA LUMPUR MALAYSIA - Friday, August 20, 2004 at 04:38:32 (PDT)

no
Muhammad Asim
Rawalpindi, punjab pakistan - Thursday, August 19, 2004 at 21:23:25 (PDT)

I need info on stationary engineer exams in South Carolina. Thank you
Rodney D. Thomas
Columbia, South Carolina United states - Tuesday, August 17, 2004 at 21:20:45 (PDT)

I think it is very fruitful forum for boiler engineers to communicate.
Hidayat Ullah
Swabi, NWFP Pakistan - Monday, August 16, 2004 at 09:13:26 (PDT)

Cool site keep it up
Donald Jackson
Oklahoma City, Oklahoma United States - Friday, August 13, 2004 at 19:13:59 (PDT)

I look forward to sharing steam heating information from years past along with what makes sense today! Reach me at porterfield@informed-energy-decisions.com.
John Porterfield
Chicago, IL US - Tuesday, August 10, 2004 at 11:55:17 (PDT)

Plant operator Good Sam Hospital. Great Site
Ken Donaldson
corvallis, ore usa - Tuesday, August 10, 2004 at 08:08:48 (PDT)

hii .. was fascinated seeing ur site . its extremely well built and hasm a lot of information in it . i am interested in aquiring the information about certification of boiler engineers in india thank you pramod
pramod gajbe
cochin, kerala india - Thursday, August 05, 2004 at 08:23:26 (PDT)

i'm interested in knowing if you could send me an email as to where i can find a school to learn about high pressure boilers and about turbine boilers . in my area. also i would like to know about employment in boiler field in other states. i have a grade a engineer's lic. in the state of pa.
gary wilson
philadelphia, pa. usa - Thursday, August 05, 2004 at 07:41:24 (PDT)

Looking for a position in Southeastern Ohio. Athens, Logan, Nelsonville. rivernat@yahoo.com
Ed Daum
Alliance, Ohio USA - Thursday, July 15, 2004 at 10:55:12 (PDT)

Looking for a certified bolier inspector in or around Farmville Va.
B. Precious
Lynchburg, VA USA - Thursday, July 15, 2004 at 10:20:57 (PDT)

Just wanted to sa whats up to all of the operators out there.
Stephen
Detroit, Michigan Wayne - Monday, July 12, 2004 at 23:23:29 (PDT)

Been an BPO since 1970 working for the Navy.
Andy Gallagher
Chesapeake, Virginia USA - Monday, July 05, 2004 at 10:45:23 (PDT)

Checking on the states and citys with a Stationary or Boiler Operators Licensing Program.
James Snider
Napoleon , Ohio USA - Saturday, July 03, 2004 at 17:51:10 (PDT)

Been searching for confirmation why I should change my carrer. I have been working in production for last 16 yrs form line worker to Supervisor but I am tired. This will be my new challenge and it is good to see it is such a large community. Question: How do I get job experience? and how do I approach companies? Geoff
Geoff Maina
Brockville , Ontario Canada - Saturday, June 26, 2004 at 00:39:12 (PDT)

I just found your web site. Great source of info for us.Its good to know that there still alot of us left. I have been the business a lifetime, and still love it. Steam is my veins. I owe it all to the USN. I can still smell the Bunker C. I love it. Bang those burners. Working the midnight shift right now. One Coal Boiler. One GAS Boiler.Signing off for now shipmates. The XHOLE Snipe RW.6-25-04 The Great State of Ohio.
Ronald L Wharton
Carrollton, Ohio USA - Friday, June 25, 2004 at 00:39:48 (PDT)

Retired Naval Engineer and civilian Unlimited Steam Engineer. Nice Web Site.
Stanley Hunter
Lucerne Valley, CA United States - Monday, June 21, 2004 at 15:41:25 (PDT)

Plz add me to the site~!
Arindam Mukherjee
Kolkata, West Bengal INDIA - Thursday, June 17, 2004 at 09:20:04 (PDT)

I am searching for employment
Anthony Senior
willingboro, nj U>S> - Sunday, June 13, 2004 at 13:58:29 (PDT)

Good site - wanted to see what was new on the market. My Email adress is nigelbr@mweb.co.za Cell Phone: 083 4449642
Harod Ellis - H & M Boiler Services
Cape Town, South Africa - Tuesday, May 18, 2004 at 01:27:35 (PDT)

Got my Stationary Engineers license from St. Louis, Mo. in 1996. It was the toughest thing I ever did, trained under Earl Reynolds at Ranken College. Hello to all St. Louis engineers.
Keith Sullivan
Kansas City, Mo. USA - Friday, May 14, 2004 at 19:57:39 (PDT)

I am interested in finding some interactive software on "Boiler Training", "Steam Traps", "Regulators" etc...., to enhance a training program we are starting for inmates at a Prison........If anyone knows of any such software,,,,,Please E-mail me at "CRogers@bop.gov" and have the subject of the E-mail indicate......... "Boiler Training".
Walter Rogers
Fl USA - Tuesday, May 11, 2004 at 10:41:28 (PDT)

I am searching for an apprentice program in Rhode Island for boilerrroom. thanks
Anthony Padula
West Warwick, RI usa - Sunday, May 09, 2004 at 11:02:42 (PDT)

Used your website to search for technical data on Mercoid steam trap and control unit.
Robert H. Long
Gainesville, Georgia USA - Friday, April 30, 2004 at 06:11:42 (PDT)

I want to be a good boiler engineer. I want to get boiler and boiler equipment sels agent.
Mahbubul Karim
Dhaka, Bangladesh - Tuesday, April 27, 2004 at 08:01:43 (PDT)

I really enjoyed the site, and am really interested in learning as much as I can and which is readily available. I am an engineer by trade, and am really thankful for the information provided in here. It has really help me a lot in getting endless information on this particular subject(boiler.)Once again great job - keep it up. Please if you could send any other new tech or useful information to the address below: jtabaiwalu@yahoo.com thank you.
Jone Tabaiwalu
Suva, Fiji - Sunday, April 25, 2004 at 17:04:04 (PDT)

I have enjoyed this site,looking forward to hearing from any operators.I'm presently in Florida.I am looking to find any navy correspondence books you may want to unload,in regards to boiler tech operations,also if you have any information on how to obtain a license for operating boilers in Florida,I would like to hear what info you have. I am seeking information on licensing for Stationary Engineers in Florida ,if you know where I may get any data please E-mail me-jaguars3@earthlink.net Thanks
Mr.Dunnagan
Jacksonville, Florida USA - Saturday, April 24, 2004 at 20:05:29 (PDT)

Interesting website. I am looking for a position outside of the US mainly due to immigration requirements, am a power plant engineer with about 30 years experience having worked my way up from Shift Supervisor to Mechanical Maintenance Engineer and there after to power plant manager.
john kiewiet
Barrydale 6750, Western Cape South Africa - Tuesday, April 06, 2004 at 03:58:00 (PDT)

I am a HVAC&R, Build-Design Technical Director of Service Operations & Project Management for AC&R Company of Fayetteville, NC and find your site to be a fantastic source of information! Thanks and keep up the good work!
Robert Rathgeb
Fayetteville, North Carolina US of A - Friday, April 02, 2004 at 20:49:40 (PST)

i need technical information about boilers ( hot water / steam ) and the accessories which the boilers need
heba
cairo , egypt - Thursday, April 01, 2004 at 04:25:42 (PST)

checkin
Mark V. Harney
Bakersfield, California U.S.A. - Saturday, March 20, 2004 at 18:53:01 (PST)

Have not been here for awhile but now I am back. This site improved considerably. Great job by everyone making it happen. Very helpful site.
Melvin Riego
Hamilton, Ontario Canada - Saturday, March 20, 2004 at 07:06:19 (PST)

Manager of the Machinery & Equipment Specialties department of Cincinnati Insurance Company. Contact information as follows: phone: 513-8970-2782 fax: 513-881-8895 e-mail: jeff_grove@cinfin.com I would interested in hearing from anyone with a current commission from the National Board of Boiler & Pressure Vessel inspectors who is looking for opportunities to utilize that commission as an inspector in the insurance industry.
Jeffrey Grove CPCU
Cincinnati, Oh USA - Thursday, March 18, 2004 at 08:24:22 (PST)

very good web site
sg
Singapore, Singapore Singapore - Sunday, March 14, 2004 at 23:58:41 (PST)

WE ARE MANUFACTURERS REPS FOR STEAM AND HOT WATER BOILERS.WE HAVE BEEN IN BUSINESS SINCE 1958. WE ARE LOOKING FOR A CAST IRON LINE OF BOILERS TO REP.(COMMERCIAL MARKET) WE ARE ALSO INTERESTED IN A FORCED FLOW STEAM GENERATOR LINE TO REP.
D.B. JOHNSEN CO. MICHAEL KOVACS,SERVICE MGR
RICHFIELD, OHIO USA - Wednesday, March 10, 2004 at 13:50:05 (PST)

Hi, just wondering if this site can be helpful to find employment. Thanks Harry Pelton
Harry Pelton
Halifax, Nova Scotia Canada - Tuesday, March 09, 2004 at 10:14:40 (PST)

Google guided me to your site. Congratulations and thanks, it is a very useful site for us who work with Power and Steam Generation. Regards, Geraldo
Geraldo Jose Ferreira
Rio de Janeiro, RJ Brazil - Tuesday, March 09, 2004 at 05:09:35 (PST)

BT1(SW) RETIRED AFTER 20 YEARS OF HAZE GREY AND UNDERWAY. DEMANDING WORK, LONG HOURS, LITTLE RECOGNITION. BEST YEARS OF MY LIFE AND BEST FRIENDS ANYONE COULD EVER ASK FOR. WOULD DO IT ALL AGAIN. "SNIPES" RULE. CURRENTLY WORKING FOR NAVSEA SUPSHIPS ON HOVERCRAFT IN NEW ORLEANS. thirdmac@aol.com@aol.com
Robert Mac Isaac
Violet, La. USA - Thursday, February 26, 2004 at 10:53:38 (PST)

I am glad I found such a helpful site on the internet.
Edgardo Arroyo
San Juan, Puerto Rico USA - Wednesday, February 25, 2004 at 09:22:53 (PST)

Excellent site for us laymen
Thomas J. Riley
Tyrone, Pa USA - Tuesday, February 24, 2004 at 10:57:42 (PST)

Hello to all the BT's out there. I served on the USS Acadia from 1980-84.
Scotty Davis
Texarkana, Texas U.S. - Thursday, February 19, 2004 at 12:27:15 (PST)

I'm an Examining Engineer and Chief Engineer with the Georgia State Association of Power Engineers. We highly recommend Woodruff & Lammers Steam Plant Operation, Modern Refrigeration, and Electricity 1-7. Take a look at our website www.gape.freehomepage.com for additional information on testing and schooling.
Chet Snyder
Myrtle Beach, South Carolina USA - Monday, February 16, 2004 at 08:48:50 (PST)

Plz send me details of exams for boiler operator certificate.
Piyush Vastani
Mumbai, Maharashtra India - Friday, January 30, 2004 at 01:15:20 (PST)

Does anyone know where I can find if someone is a licensed boiler operator? I want to hire someone I just don't know if they have the credentials.
Boilerguy
New York, N.Y USA - Saturday, January 24, 2004 at 16:42:37 (PST)

Just wanted to see if any of my shipmates use this website. I am a Master Chief Boiler Technician representing the Navy Steam Generating Plant Inspectors at NAVSEA.
David E. Miller
Virginia Beach, Virginia USA - Friday, January 23, 2004 at 04:48:38 (PST)

MPA LPD-10 CHENG DDG-15 CHENG CG-21 DCA CV-63 CHENG FTG-PH 3rd Asst Cape Isabel 3rd Asst Cape Inscription 3rd Asst Matson Eva I B Snipe
Bruce Stirling
Long Beach, CA USA - Saturday, December 27, 2003 at 10:58:15 (PST)

Hello to all of the former Boiler Tech's out there after 20 years of loyal naval service it's time for this BT Senior Chief to head home to Dayton Ohio. Wish me luck in preparing for my Ohio Stationary Engineers Exam. email: r.ghouse@verizon.net
Reggie Greathouse
Suffolk, VA USA - Saturday, December 27, 2003 at 06:46:57 (PST)

I got here by looking for a boiler screen saver, I t has been hard to find I had it at one time but maybe you can help me
Mike Morgan
Virginia Beach, Virginia USA - Monday, December 22, 2003 at 18:13:20 (PST)

where do i get info for a new york steam license....already licensed in other states......how do i go about applying....what agency do you contact
jon perry
waukegan, ilionois usa - Wednesday, December 10, 2003 at 11:35:18 (PST)

I am enjoying your site, Thank you. Ron
Ronald Toothaker
Gardner, MA USA - Saturday, November 22, 2003 at 07:39:21 (PST)

Great site. I enjoyed my first visit.
Kenneth L. McClellan
Morristown, Tennessee USA - Friday, November 21, 2003 at 07:45:33 (PST)

SNIPES RULE!!! USS DUBUQUE 84-88. NOW AT UC IRVINE CAMPUS. NICE WEBSITE. THANKS.
BARRY CUMMINS
CYPRESS, CALIFORNIA USA - Thursday, November 20, 2003 at 17:49:41 (PST)

Your forum is interesting and informative. Keep up the good work.
Blair Boese
Fort Nelson, British Columbia Canada - Wednesday, November 19, 2003 at 20:02:18 (PST)

Boiler operator and former MM Us Navy
Donald Jackson
Oklahoma City, OK United States - Wednesday, November 19, 2003 at 18:44:38 (PST)

Currently preparing to take the 3rd class stationary steam engineer's license exam for the state of ohio.
Curtis Workman
Beverly, Ohio USA - Sunday, November 16, 2003 at 08:43:57 (PST)

hi Engineers & Operators how came a Low presure Steam System full up with water on the steam side all boilers and pumps are off City water Valve are closed to the boilers & there no leaks my E-Mail biglou@comcast.net Getting ready for LA steam license test. hope to learn more from your web.
Mo Chin
Los Angeles, CA USA - Wednesday, November 12, 2003 at 14:01:42 (PST)
Thanks for providing this forum.
Victor Mirando
Buffalo, NY US - Thursday, November 06, 2003 at 15:50:17 (PST)
I am a havc mechanic working for the county. i have alot to learn. Just started learning water testing and treatment,For steam and hot water systems
Ronald abramowitz
POughkeepsie, N.Y. Doutchess - Sunday, November 02, 2003 at 04:14:28 (PST)
no comments now
surinder mkhirbat
edison, nj usa - Saturday, November 01, 2003 at 19:28:26 (PST)
Just a old BT retiring soon. Great web site.
Clarence F Bridges Jr.
Jacksonville, Fl USA - Tuesday, October 28, 2003 at 18:04:56 (PST)
Retired BTC currently living in San Diego.
Johnny Williams
San Diego,, California USA - Tuesday, October 28, 2003 at 11:41:31 (PST)
LOVE YOUR SITE---WHENEVER I HAVE PROBLEM OR WANT INFORMATION--HERE YOU ARE--THANK YOU
JOHN T COLAO
CLIFFSIDE PARK, NEW JERSEY USA - Friday, October 24, 2003 at 10:57:45 (PDT)
I visit your site often and find it very interesting and helpful. Thank you, Ted
Ted Bergstrom
Minneapolis, Mn - Thursday, October 23, 2003 at 10:16:21 (PDT)
My children are the great great grandchildren of Patrick Fitzgibbons and we collect any information we can find about the boiler works. We'd be very pleased to find a picture of the plant.
Jean Fitzgibbons
Dryden, New York USA - Tuesday, October 21, 2003 at 14:09:37 (PDT)
Just retired from the Navy on 30th September as a forced converted MM after 16 good years of being a tried and trued BT. Did the whole up and down thing with pay grades mostly for being the version of BT I first learned under. Hope to hear from some old bilge diving snipes out there. brimer@i-plus.net
Darin Brimer
Radford, Va. United States - Monday, October 20, 2003 at 17:32:34 (PDT)
we are trying to sell our home we have about 12000 in equity after the sale we do have an offer the house needs a furnace we dont have the money up front but we will have it at closing any idea where we can get help mdgmkolz@frontiernet.net
marty kolz
canandaigua , new york - Tuesday, October 14, 2003 at 09:53:01 (PDT)
This is my first time to visit your website. I'm looking for the boiler suppliers from Japan to supply for the small power producer plant in Thailand. The out put of steam ranges from 50 to 100 MW.
Sompol Chaengsri
Bangkok , Thailand - Tuesday, October 07, 2003 at 22:20:22 (PDT)
Looking for a Boiler or Burner that use Deisel & Used oil as fuel. THanks, NESTOR a. nIEVERA
Nestor A. Nievera
Marikina City, Philippines - Monday, October 06, 2003 at 07:37:04 (PDT)
Great Site !! Shift Supervisor 250mw CFB facility
T.Butler
Jacksonville, Florida USA - Sunday, October 05, 2003 at 01:18:44 (PDT)
I have been a boiler operator since 1972. Trained in the navy currently working in a hospital setting in southern california. Additionally I have a water treatment license, la steam engineers license.
Charles Roark
Palmdale, California USA - Friday, September 19, 2003 at 05:24:54 (PDT)
Geat site 3rd class looking for a job hope i find it here.2nd class bt from USS PONCE
Andrew Henney
Bellevue, Ohio U.S.A - Tuesday, September 02, 2003 at 17:17:32 (PDT)
GREAT SITE. KEEP UP THE GOOD WORK.
LARRY ADAMS
TOLEDO, OHIO USA - Sunday, August 31, 2003 at 16:34:13 (PDT)
a very interesting and helpful site, thank you
glenn zakarzewski
manville, n.j. usa - Monday, August 11, 2003 at 06:47:34 (PDT)
I have supervised installed and commissioned LPS,HPS,HTHW and CHW plants for 20 years (up to2500BHP/ 10,000 tons.I am interested in obtaining a stationary operator,s license in New Jersey. Can anyone point me in the right direction?
Gerald E. Joyce
Bound Brook, NJ USA - Sunday, August 10, 2003 at 08:26:02 (PDT)
great spot pick things up
john f vellucci
WARMINSTER , pa bucks county - Saturday, August 09, 2003 at 08:39:08 (PDT)
I am a Navy Boiler Tech who is retiring in 11 mo. I am looking for some place to get information about getting my stationary licence & looking for job openings. Can some one Email me with the information. charlesgordon_2000@yahoo.com Thanks
Charles Gordon
Bremerton , Wa USA - Friday, August 08, 2003 at 22:04:13 (PDT)
I'm looking for boiler school in calf. or nationwide
william berger
Escondido, ca usa - Thursday, August 07, 2003 at 17:00:46 (PDT)
I need information on training for cogeneration in laymens terms so those who are knew to the field like myself can ask career oriented questions about hvac boiler operation and cogeneration.
ronnie barker
somerset , new jersey usa - Saturday, August 02, 2003 at 10:54:58 (PDT)
My Dad was a Timken Silent Automatic oil burner, furnacxe and boiler distributor in the 50's. He passed away last year and we are cleaning out his stuff which includes some material (tech, advertising and promotional) on this equipment. I don't want to see history like this trashed, so if anyone has intrest , e-mail me at john@tvli.net
John Lobbestael
Gregory, Michigan USA - Saturday, July 19, 2003 at 19:26:30 (PDT)
I WAS SURFIN' SO DESPERATELY TO FIND A WEBSITE THAT WOULD GIVE FURTHER INFOS 'BOUT A FRIEND OF MINE IN THE NAVY I GUESS I GOT LOST
JENNY CASTOR
JARO ILO-ILO CITY, PHILIPPINES - Friday, July 18, 2003 at 04:11:10 (PDT)
Hello, I heard about a direct vent gas heater with a boiler attachment for water heating also, but I have not found any such thing. do they exist, and where can I research this combination option
brian in alaska
anchorage, alaska U.S.A. - Wednesday, July 16, 2003 at 08:44:12 (PDT)
I am currently engage in fabrication and installation of Boilers, HRSG, Heat Exchangers, Pollution Control devices
Elmer G. Perello
Las Pinas City, Metro Manila Philippines - Saturday, July 12, 2003 at 01:55:13 (PDT)
I am currently looking for a possition as a facilities mechanic in western Washington state. I hope this board can help!
Dennis S Stroba
Tacoma , Washington USA - Thursday, July 10, 2003 at 17:45:18 (PDT)
I have been working with high pressure and low pressure idustrial and commercial and residentian oil and gas boilers for nearly ten years. I love the field, I enjoy challenges and hard work that comes with being a "Boiler Man" I hope to only learn more as I get older.
Jason D. Kiss
Middletown, Rhode Island - Thursday, July 10, 2003 at 16:01:58 (PDT)
oh, the email to contact is scot350@aol.com
scott j
cola, sc - Saturday, July 05, 2003 at 23:16:57 (PDT)
IK mechanic with 12 yrs. experience with diamond power G9B, 525, IKSD and thermoprobes seeks position in either maintenance or field service. previous experience with recovery boiler and bark boiler ash handling equipment. i comissioned twenty additional sootblowers during a boiler upgrade in '96 and set up the maintenance program for the IKs, and served as IK maintenance trainer afterwards.
scott johnson
columbia, sc usa - Saturday, July 05, 2003 at 23:15:18 (PDT)
i am Looking for a job as a Burner/Engineer worldwide Startup from burners, and steam/water boilers for info: mail at gasburner@planet.nl
Remco van Triest
Staphorst, Overijsel Nederland ( Europe) - Tuesday, July 01, 2003 at 06:24:38 (PDT)
MA. 2nd class eng. I am an instructor at a small private school for ma. fireman and engineers, and also for city of providence r.i. boiler oper. and stationary eng. I have gotten answers to some fairly obscure questions from the steam forum a big help a great site thank you
mark feilhauer
somerset, ma. u.s.a. - Wednesday, June 18, 2003 at 06:44:15 (PDT)
If any one knows of any schools on becoming a Boiler Operator or Power Plant operator in the state of New Jersey.Then please contact me with the information at numzz@comcast.net
Norman R Allen Jr
Sewaren, NJ USA - Monday, June 09, 2003 at 05:30:56 (PDT)
Ottimo sito, complimenti, visitate comunque www.garioninaval.com ciao e grazie
Tedoldi Gianluigi
Brescia, Italia Castelmella - Sunday, June 08, 2003 at 14:53:46 (PDT)
I work for Dubois Chemical. Boilers and cooling towers, covering Central Florida. I just thought I would tell you all what a great web site youhave. Thank you, Ronnie Taylor
Ronnie Taylor
Orlando, Florida USA - Sunday, June 08, 2003 at 07:40:50 (PDT)
Great website!! Currently U.S. Navy Boiler inspector, looking at website for potential employment after the Navy. Boiler Inspecting, operating, controls tech. email mmc.richard.uglum@ftsclant.navy.mil
Richard Uglum
Norfolk, Va USA - Tuesday, June 03, 2003 at 07:12:43 (PDT)
I'm a BT2 in the US Navy. I'm stationed on the USS Peleliu a CE Super 600 mod 700psi. I found your web site while looking for jobs in longview texas This is a GREAT site
Lawrence Fraley
San Diego, CA USA - Sunday, May 25, 2003 at 14:25:06 (PDT)
VERY INTERESTING WEB SITE!
EDDIE JARRELL JR
BROOKLYN, N.Y. UNITED STATES - Sunday, May 11, 2003 at 13:24:48 (PDT)
I have 19 years of commercial & industrial boiler experiance and 6 years A/C experiance. Am looking for position in a Power Plant or facilities. Please e-mail me at charlesrenkel@msn.com Terrific site. Keep up the good work!
Charles Renkel
Phillipsburg, N.J. U.S.A. - Friday, May 09, 2003 at 19:48:59 (PDT)
Great site , hours of info. and reading
Iain L Turriff
Portland, Oregon USA - Sunday, May 04, 2003 at 17:16:04 (PDT)
Great site looks like I've finally found help
David Morgan
Huntingdon, Tennessee USA - Thursday, April 24, 2003 at 22:36:18 (PDT)
I RECIEVED MY BLACK SEAL LICENSE IN 1-1-2000, BUT HAVE NOT REINSTATED THEM. COULD I GET INFO: ON HOW TOO REINSTATE MY LICENSE AND HOW MUCH THE FEE WOULD BE AFTER (3) YEARS OF NOT DOING SO?..
ANTHONY R TAYLOR
EAST ORANGE , NEW JERSEY UNITED STATES - Tuesday, April 22, 2003 at 17:13:22 (PDT)
Great site. Its helped me out a bunch. Thanks
Robert Ramsey
Houston, Texas U.S.A. - Tuesday, April 22, 2003 at 05:32:49 (PDT)
A few stats: have a First Class Ohio Stationary Engineer licence, a First Class NALUPE licence, an electrician journeyman card and 37 years experience with coal, gas and oil fired water tube boilers at The Timken Co in Canton Ohio. We also have five steam turbines in use for various pumps.
Dan P. Stroia
North Canton, Ohio USA - Friday, April 11, 2003 at 18:05:09 (PDT)
Controlroom Operator 690 mw Unit
James Sylvester
Chester, Maryland Usa - Monday, April 07, 2003 at 17:47:06 (PDT)
I am currently a boiler operator at Marine Corps Air Station Beaufort,SC. The powers that be are going to shut the boilers down in the near future.Can anyone tell me how to get information on how to get started on my boilers liscense.Thanks, Richard
Richard Curton
Beaufort, SC USA - Saturday, March 29, 2003 at 21:49:11 (PST)
I'm trying to locate companies that use radiant heating tubes for heat generating furnaces or petroleum facility maintenance. American MetalTech ammetaltek@aol.com
Nick Overall
Media, PA USA - Friday, March 28, 2003 at 11:46:06 (PST)
Just want learn
Bill Porter
Millville, N.J Cumberland - Wednesday, March 26, 2003 at 20:13:47 (PST)
I think this is a great site. I just got my licence and am trying to "break in" to the field. This site is a great source of information on not only employers, but study materials as well.
Paul J. Byrne Jr.
Westfield, Massachusetts USA - Tuesday, March 18, 2003 at 06:00:59 (PST)
Great site, informative. I like the forums. One wish- an easier to read (larger?) menu.
G Granito
Middletown, NY USA - Thursday, March 06, 2003 at 08:22:09 (PST)
Chairman of the Examing Board of Rochester, NY
William Carey
Rochester, New York U. S. of A. - Wednesday, March 05, 2003 at 10:10:44 (PST)
Only just entered, but looks good.
john holm
bristol, bristol UK - Thursday, February 27, 2003 at 03:09:10 (PST)
This is an excellent web site for the consuming public to better understand the use of energy in our homes. We home owners need to be more diligent in energy use and if we are better informed it may not only save dollars but in fact keep us safer. Hats off to all of you who have made this possible.
Paul P. Sachar
Cranesville, PA USA - Wednesday, February 26, 2003 at 11:41:18 (PST)
I am currently taking a process operator course. I will have my 4th class power engineer ticket in June 2003
Ryan Kuchelyma
Saskatoon, SK Canada - Wednesday, February 19, 2003 at 19:24:06 (PST)
I work for Northeast controls Inc. a representitive for Emerson Process Management. We are a process controls system intagrator and are interested in working with Unlimited Energy Inc. The web site is very easy to navigate and informative.
George Foor
Rochester , NY USA - Thursday, February 13, 2003 at 05:37:35 (PST)
BOILER OPERATOR,(2),150PSI, 100,000LB/HR,TOMATO PLANT,9YRS THIS JOB.
mr.JERRY DRUMELLER
MANTECA , CA. USA - Wednesday, February 12, 2003 at 02:14:26 (PST)
I'M LOOKING TOWARDS GETTING MY BOILER OPERATOR LICENCE AND WORKING MY WAY UP TOWARDS HIGH PRESURE STEAM.MY E-MAIL IS SAM31@OPTONLINE.NET
JAMES SOUTHARD
SOUTH HUNTINGTON, NEW YORK SUFFOLK - Monday, February 10, 2003 at 12:40:21 (PST)
Operation Technician at Calpine
Dave Bass
Bartow, Florida Polk - Thursday, February 06, 2003 at 07:46:46 (PST)
Please add my name to information list,...excellant site.
William Powers
New York, NY USA - Tuesday, February 04, 2003 at 18:46:18 (PST)
Thank You for such an informative sight.
Joe Cannella
Atlanta, Georgia U.S.A. - Wednesday, January 22, 2003 at 08:51:00 (PST)
Help I need parts and some questions answered,
Patrick Green,for John Deere Seeding Group
Moline , Illinoise Rock Island - Tuesday, January 21, 2003 at 10:47:16 (PST)
Please call me with price and Availibility for a Temporary CB-100-600-125 system main HW Pump 1000GPM
Steven Schutz -Grubb & Ellis Management -Chief Engineer - IBM Somers, NY ;
Somers, New York USA - Thursday, January 16, 2003 at 12:50:05 (PST)
Do any one help with notes for 4th class operating engineer course.reply soon as I am soon appearing for exam.
harry ;
toronto, ontario canada - Wednesday, January 15, 2003 at 06:04:39 (PST)
do you have formula to convert US gallon to imperial gallon let me know Yours truly Nick D'Aurizio
Nick D'Aurizio
Welland, Ontario Canada - Wednesday, January 15, 2003 at 04:17:46 (PST)
As someone working for a NYC Public Authority where information and training is a rarity, this is a fantastic site! I wish I had found this four years ago. Thanks.
Roger Heraghty
New Fairfield, CT USA - Sunday, January 12, 2003 at 13:49:00 (PST)
Wish I had known about this site 2 years ago.It would have been a great help in finding parts and in finding a job.
Scott G. Smith
Bakersfield, California United States - Monday, January 06, 2003 at 12:05:28 (PST)
This is a very informing site. I will be visiting more frequently to review current or new information.
Matt Whitaker
Milwaukee, WI USA - Friday, January 03, 2003 at 07:24:54 (PST)
looking for the chatroom plz. answer
david
hutchinson, ks usa - Wednesday, January 01, 2003 at 15:18:53 (PST)
I WOULD LIKE TO KNOW IF ANYONE CAN HELP ME FIND A APPRENTICESHIP, SCHOOL FOR ENGINEERING IN THE WASHINGTON D.C.OR MARYLAND AREA OR A ENTRY LEVEL JOB,I HAVE TWO YEARS EXP IN LOW PRESSURE BOILERS,IN THE D.C.PUBLIC SCHOOL SYSTEM PLANTS. THANK YOU (KEVIN SAUNDERS)
KEVIN SAUNDERS
WASHINGTON D.C. 20019, D.C. USA - Sunday, December 29, 2002 at 16:11:39 (PST)
IS THERE A BOILER OPERATOR'S UNION IN NEW JERSEY?? IF YES, CAN ANYONE GIVE ME THE ADDRESS.. THANK YOU J.S.Dua
Jagjit singh Dua
Iselin, NJ USA - Sunday, December 29, 2002 at 11:07:28 (PST)
High Pressure Shift Supervisor running 950 Bhp in a manufacturing plant
Jason Kearney
Washington, New Jersey USA - Saturday, December 28, 2002 at 18:39:49 (PST)
Nice site. I am ex-Navy BT, ex-B&W engineer, ex-Struthers Industries engineer, now consulting.
John T. Wade, P.E.
Mobile, AL USA - Monday, December 23, 2002 at 14:59:38 (PST)
I have been doing commercial boiler work for 12 yrs and I;am looking for a school to furthering my education and getting some degree for this kind of work.
david jackson
claremont, n.h. usa - Monday, December 23, 2002 at 13:59:41 (PST)
Looking to learn more about low pressure boilers
Reinhold Woykowski
North Branch, New jersey USA - Tuesday, December 17, 2002 at 09:26:31 (PST)
very impressed with the info available here this is great .. thank you
Ryan Kelly
winnipeg, manitoba canada - Sunday, December 15, 2002 at 19:22:07 (PST)
lookng to finde a class in columbus ohio for high and low pressure boilers need if before march. If you can help I would be greatful. freerider
freerider
pataskala, ohio usa - Sunday, December 15, 2002 at 17:22:48 (PST)
Hi Folks.... I Just want'ed to thank you for this web page. I have been fighting a very serious problem at work; Dealling with the new installation of a 12" pigh preasure steam line. I have found quite a few answers and verifacation information with in your web site. I have entered your site into my favorites and will use it quite a bit. And I will pass it on to our engineers so they mite beable to learn something....to... Thank you so much. and please keep up the good work Bruce Blakesley Steamfitter / Welder University of Northern Iowa
Bruce C. Blakesley
Cedar Falls., Iowa United States of America.......or....( The good old U.S.A.) - Wednesday, December 11, 2002 at 19:07:45 (PST)
A very good ideea. Usefull for a lot of people. Suggestions: Could be interesting for many reasons to create new categories: corrosion diminution, emission reduction, fuel saving methods.
Mihai SUTA
Bucharest, Romania - Friday, December 06, 2002 at 22:42:56 (PST)
Great site, lots of useful information. Working in a facility that produces over a million pound per hour of steam all information is useful. Thanks...
Mark Moore
Soldotna, Alaska USA - Monday, December 02, 2002 at 06:55:42 (PST)
I sure am happy to find this web site -- very useful. I hope someone can help me to find employment. I have worked as a Boiler Room 2nd Class Fireman for over 20 years and have recently learned that my present job will be ending in January as the company is closing their doors. If anyone knows of anyone hiring in the Western MA. area, I sure would appreciate any leads.
Gary Batrano
Williamsburg, MA USA - Wednesday, November 27, 2002 at 08:55:49 (PST)
Hi my name is Everett: I have a fourth class licenes and I want to get my third class licenes.I would like to have at least one year on the job training.If anyone can knows whereI can get this training please write me. Yours truly Everett G. E-mail
Everett EF. Goss
Enfield, Ct. USA - Thursday, November 21, 2002 at 16:09:46 (PST)
I have been plumbing 20yrs Working on hwh some, Steam min. Just looking to ask questions to learn more about it.Happy to find Boilerroom.com Thanks
T. Moeller
Buffalo, NY USA - Sunday, November 17, 2002 at 07:25:42 (PST)
good site to share knowledge. I like to contact Canadian Stationary engineers who are working in the middle east I have a Third Class Boiler ticket and 18 years of experience operating Steam/Diesel plant.
Jeet brar
winnipeg, manitoba canada - Thursday, November 14, 2002 at 11:14:45 (PST)
I am delighted to find boilerroom.com and I know it will of great help to me. I have worked with steam generating plants for the past 12 years.
KEITH MANIFOLD
Brooklyn, New York USA - Friday, November 08, 2002 at 18:31:39 (PST)
IS IT MANDATORY FOR A PERSON, TO BE LICENSED, TO OPERATE LOW PRESSURE BOILERS IN THE SCHOOL DISTRICT OF PHILADELPHIA
ANTHONY LOCCHETTO
PHILA., PA. 19148 U.S. - Saturday, November 02, 2002 at 05:08:44 (PST)
Dear Boiler Room, PLEASE HELP!! I am searching for a used Vari vac differential pump for an older boiler system. Is there anyone out there who knows where to find used parts? Thank you for your help. Marc McCormick marcjmccormick@hotmail.com
Marc McCormick
Independence, Kansas - Thursday, October 31, 2002 at 22:06:27 (PST)
Im a Boiler Tech in the U.S. Navy...on of the last. This is a great site lots of info and links. Thier is nothing like putting a torch to the beast and bringing it to life. I've steamed B&W's and F&W boilers 1200psi all over the world. Keep up the great site, I plan on returning often. Thanks
Joe richardson
Keflavik, Iceland - Thursday, October 31, 2002 at 20:58:37 (PST)
Nice to find a site that covers the industry......................
Michael W. Hughes; Chief Power Engineer
Hampton Roads, Virginia USA - Tuesday, October 29, 2002 at 15:27:09 (PST)
Great web sight, boiler water treatment is my job now. Came from boiler operation, and maintenance.
Dave Elliott
Peabody, MA USA - Sunday, October 27, 2002 at 18:42:46 (PST)
THANK GOD FOR THIS SITE, I AM CURRENTLY LOOKING FOR REVIEW MATERIAL FOR THE NYC HIGH-PRESSURE BOILER EXAM. HOPEFULLY SOMEONE ON THIS SITE CAN HELP. THANKS IN ADVANCE
BARRINGTON FULTON SR
ROSEDALE, NEW YORK USA - Saturday, October 26, 2002 at 18:26:08 (PDT)
Hello I am trying to get my stationary engineering license for north carolina, I have been in the high pressure business for over 15 years, 10 years in power generation in ny can someone help thanks
Frank LoMonaco
princeton , nc usa - Friday, October 25, 2002 at 18:52:48 (PDT)
Good Site with some usefull information. My experience covers 550psi B&W boilers 6 Mpa Mitsui boilers and LM2500 GE Gas turbines. Smallest plant was 30,000 hp.
Peter Paroz
Sunshine Coast, Queensland Australia - Thursday, October 24, 2002 at 14:05:08 (PDT)
A GREAT WEBSITE FOR STATIONARY ENGINEERS AT LAST WE HAVE A VOICE. COOL
CHARLES ANATSUI
SILVER SPRING, MARYLAND & WASHINGTON DC USA - Wednesday, October 23, 2002 at 19:20:30 (PDT)
THIS IS MY FIRST TIME ON THIS SITE AND IT HAS ALOT OF GOOD INFORMATION.I AM A SUPERINTENDENT IN A 149 UNITS IN ONE BIULDING AND 30 IN ANOTHER, AND NOW IM TRRYING TO GET MY NUMBER #6BOILER LICENSE SO THAT I CAN MOVE ON TO ANOTHER COMPLEX.IF YOU HAVE ANY HALPFULL INFORMATION IT WILL BE APRECIATED THANK YOU.
Joseph Marin
far rockaway , NEW YORK UNITED STATES - Wednesday, October 23, 2002 at 10:27:05 (PDT)
I knew there had to be a boiler site somewhere. lol
Clay Richter
Newport News , Virginia United States of America - Tuesday, October 22, 2002 at 16:23:32 (PDT)
There is a very good course for stationary engineers given at S.A.I.T (Sothern Alberta School of Technoligy.)This course is provided to 28 different countries around the world.This course is offered in school and also by home study courses.
Richard B Cunningham
Ottawa, Ontario Canada - Monday, October 21, 2002 at 11:28:02 (PDT)
full mechinicial contractor local 85 Saginaw,Michigan hydrogenic heating and process piping duckwork hvac equipment gas piping unlimited heating service limited service going for unlimited Mar 2003 refrigeration refrigeration handling univeral journeyman plumber talking masters in Dec 2002 medical gas certification updating right now brazer asme IX brazer March 2003 value repair certification boiler license 1b looking to go to 2b level march 2003
Mike Rump
SAGINAW , MICHIGAN SAGINAW - Thursday, October 17, 2002 at 23:51:00 (PDT)
Looking to fill 2 boiler operator positions in south central Minnesota. Please contact me for more info.
Eric Wettschreck
Bingham Lake, Minnesota USA - Thursday, October 17, 2002 at 09:35:33 (PDT)
I am a graduate field apprentice of local 83. The Boilermakers has been a great career choice for me. Now working in the oldest boiler repair shop in K.C. GO UNION BOILERMAKERS !!!!!!!!!!!!!!!!
CHRIS KATTOU
Kansas city , Missouri na - Sunday, October 13, 2002 at 20:28:11 (PDT)
Third Class Power Engineer with over 20 years in the field with experience ranging from small package HW units to 250,000lb/hr power boilers. Found this site by surfing. Well done.
Bob Milton
Sechelt, British Columbia Canada - Saturday, October 12, 2002 at 07:03:32 (PDT)
I've become a regular visitor to this site and each time find it helpful and informative. Thanks to all of you in the field who have responded to my questions in the "forum" area of this site and offered valuable suggestions. I'm a First Class Stationary Steam Engineer with over ten years experience on various boilers and turbines, etc. Work in Saco, Maine for an armaments and technical products manufacturer.
Thomas M. Drouin
Westbrook, Maine USA - Thursday, October 10, 2002 at 14:27:34 (PDT)
I have an immediate need to staff 4 Boiler Operators Positions. Must have a New York City Boiler Operators License. New Jersey Operators License should have reciprocity with NY. One of the Positions would need to be a Lead or Supervisor. These positions would operate a 250,000 lb/hr package boiler (200 PSI), auxiliary equipment and interface with production. Please call Pat at: 800-875-9987 or send resume to pat.clemens@naces.net
Pat Clemens
Houston, Texas USA - Tuesday, October 08, 2002 at 13:54:59 (PDT)
HELLO TO ALL THE BT'S THAT WERE BT CUZ THERE IS NONE LEFT,WELL I SERVED IN THE NAVY FROM 1986-97 1,USS JOHN KING DDG-3 2.USS JOUETT CG-29 3.SIMA SAN DIEGO 4 SIMA 41 H
BT1 ZAMORA CARLOS
TUCSON, AZ US - Monday, October 07, 2002 at 02:41:19 (PDT)
Building Maintenance / Lt. Construction / Licensed LP Boiler Operator. I've been searching for more information and people. Great to see all of the people involved or getting involved.
Patricia Watts
Newark, NJ USA - Saturday, October 05, 2002 at 12:07:24 (PDT)
I am looking for a site to find a listing of available Boiler Operators with a New York City Biler Operators License or where to go for New York Licensing information. All the site I have check out keep putting me into the same loop with no useful information. Thanks Pat
Pat Clemens
Houston, Texas USA - Thursday, October 03, 2002 at 11:01:29 (PDT)
i am a boilerman i like it.
thomas emery jr.
catron, mo. usa - Wednesday, October 02, 2002 at 17:10:01 (PDT)
Anyone in the Georgia area who is in need of a licensed examinating board should visit, http://www.gape.freehomepage.com/index.html I hold a GAPE (Georgia State Association of Power Engineers) and NIULPE (National Institute for Uniform Licensing of Power Engineers)Chief Engineers Licenses and I was on the Board until I moved to South Carolina. I am currently State Secretary for the Gape. The Gape teaches at Atlanta Area Technical Institute. I highly recommend them. Chet Snyder
Chet Snyder
Conway, South Carolina USA - Thursday, September 26, 2002 at 12:44:28 (PDT)
Checking the site out - was recommended by brother-in-law that deals a lot with boilers. I am a boiler plant operater at the Alaska Native Medical Center in Anchorage. Enjoy the job and always looking for more information. Informative site!
Janice Norman
Anchorage, Alaska USA - Wednesday, September 18, 2002 at 02:27:40 (PDT)
I am trying to find a domestic hotwater boiler that would be user friendly. We need to be able to remove the anode rodes in a tight mechanical room.
Martin Muniz
Kadena AFB, Okinawa Japan - Tuesday, September 10, 2002 at 16:41:14 (PDT)
I would like to know how to get started , or what skills or exams. needed to obtain a license as a boiler operator. I've been working in Saudi Arabia for 8 years as boiler house operator/technician. The boiler house has 3- units of boiler with each capacity of 12.5 tons/hr. ; 5-units of centravac chiller units with a capacity of 16 tons of refrigeration from Trane Co. Supplying the entire King Fahd Military Medical Complex excluding the employees housing.
Antonio L. Daganato
Surrey, British Columbia Canada - Tuesday, September 10, 2002 at 14:14:50 (PDT)
I've been working with thermodynamics plants for the past 5 years and my search for knowledege countinues. Thank you.
M. Sanders
Washington USA - Saturday, September 07, 2002 at 15:36:03 (PDT)
I would like to know how you get started ,or what skills do you need to get a job in the field of boiler operator.
arthur nivckerson
houston, TX. USA - Sunday, September 01, 2002 at 22:59:31 (PDT)
Appling fir job at powerplant needed update on boiler operations
mac mccoy
Austin, Texas USA - Sunday, September 01, 2002 at 15:30:26 (PDT)
I have just come across your side when looking for gas fired burners to interchange with oil fired in steam boilers. Certainly your side will be entered in my favorites.
Costas Hadjikyriacou
Larnaca, Cyprus - Tuesday, August 27, 2002 at 20:35:49 (PDT)
onboard the MORTON in 73 & 74 in main control
RICK RIVERS
METAIRIE, LA. U.S.A. - Tuesday, August 27, 2002 at 18:17:05 (PDT)
none at this time
Tim Woods
Attica, NY Wyoming - Thursday, August 22, 2002 at 15:37:08 (PDT)
working in a thermal power plant of 120 MW capacity as Manager Mechanical in the operation and maintanance dept.
s.shanmuganathan
Angul, Orissa India - Thursday, August 22, 2002 at 08:18:43 (PDT)
Love your site
Phil McCrackin
Buttsville, MA usa - Tuesday, August 20, 2002 at 00:13:07 (PDT)
Great Site. Lots of good info. I am currently a Navy shipboard gas tubine tech. I have 3 years left to retire and would like to stay in the field. Any info on companies using these turbines would be appreciated.
Jeff T.
minneapolis, MN USA - Friday, August 16, 2002 at 05:08:28 (PDT)
Great site. Been to it many times for information and just to browse around.
Michael J Sholtis
Cleveland, Ohio USA - Monday, August 05, 2002 at 23:12:56 (PDT)
Just found your site, some good questions and answers. Keep up the good work.
Steve Acton
Kinross, Western Australia Australia - Monday, August 05, 2002 at 22:36:40 (PDT)
We are just getting in to the boiler business. Good site.
Wayne Reinholt
york, pa - Monday, August 05, 2002 at 13:50:05 (PDT)
This is an interesting concept and a very interesting site to browse. We currently have over 50 students enrolled in our Steam Principles and Operations classes. LA
Lionel Archdale IPMT Instructor Lk Wa Tech College
Kirkland, , WA 98034 USA - Thursday, August 01, 2002 at 16:57:12 (PDT)
This is my first time on this site.
William McManus IV
Essington, Pa United States - Tuesday, July 30, 2002 at 14:15:08 (PDT)
Finally, a sight for the stationary steam engineers.
Frederick Gaudette
Exeter, NH USA - Monday, July 29, 2002 at 10:20:52 (PDT)
This is an interesting site.I`m sure it`ll come in handy many times in the future. I currently work at 2 different heating plants around the Springfield area. I`ve been asked to suggest ways to save money in daily operations. Any ideas would be appreciated. Thanx
J.Baughman
New Carlisle, Ohio - Thursday, July 25, 2002 at 15:59:54 (PDT)
I want to take the Maryland first class exam. Does anyone know who I should get intouch with, and if there is a good study guide for this test.
casey ingram
washington, dc usa - Monday, July 22, 2002 at 09:02:04 (PDT)
Glad to see this site. I am a former Navy man, and I credit all of my success from the experience I picked as a Boiler Room machinest mate. Upon my discharge, I became a 3rd grade operator, and then after 2 years I successfully tested and received my 2nd grade License. Later I went into the chemical plant business, Where I have been operating Two 1500# 910/degr superheated boilers for the last 16 years. I have been very blessed financially with my line of work. Now I am looking to slow things down a bit and get back to Stationary Engineering. So you see, its been a good life. Not bad for a former 17 year old who didn't have a clue about what lay ahead. Enough said. Will be happy to start using this site to have communications with people who have similar stories. Thanks
Jose Lozano
Channelview, Texas USA - Monday, July 22, 2002 at 08:01:08 (PDT)
THIS IS MY FIRST TIME ON YOUR SITE AND IT IS OUTSTANDING. I HAVE 24 yrs. IN THE NAVY OPERATING BOILERS. WE(IN THE NAVY) WILL NOT BE AROUND TO MUCH LONGER. I WILL BE CHECKING YOUR SITE THROUGH OUT THE NEXT YEAR FOR EMPLOYMENT. THANK YOU M. J. HEIM
MARK J. HEIM
VIRGINIA BEACH, VIRGINIA - Friday, July 19, 2002 at 12:56:16 (PDT)
I am a 4th class power engineer running a 10000Kw heating plant at the vocational college in Lac La BIche. Found your site by simply typing in boilerroom.com. Great site. Will come in handy I'm sure.
Jared Hodgins
Lac La Biche, Alberta Canada - Friday, July 19, 2002 at 08:45:33 (PDT)
Nice web site!
Michael Occhibone
new castle, Pa usa - Thursday, July 18, 2002 at 06:49:54 (PDT)
Just found site
Mark Blackwood
Newton, Iowa USA - Thursday, July 18, 2002 at 06:30:16 (PDT)
I was hoping you could offer me some help.My husband just came from Europe where he worked as a stationary engineer for the last 10 years in the maritime industry. Is there any books you could recomend for preparation to the test, or better yet any local school that prepare people for the test.ANY help would greatly be appretiated.
Patricia Pobric
Youngstown, Ohio USA - Wednesday, July 17, 2002 at 14:48:24 (PDT)
Just found your site and I think its great.
mary liggins
Washington, DC USA - Tuesday, July 16, 2002 at 13:52:06 (PDT)
Greetings to you and your guests. Love what you�ve done with your site. As an educator I can say you have great communication skills. none.
Catherine
La Mesa, Ca US - Tuesday, July 16, 2002 at 03:49:41 (PDT)
I operate a 30 bar Natural Gas fired fire tube boiler to supply 300 lb steam to a turbine turbine driving a air compressor at a chemical plant. Looking to learn about licensing boiler operators. My experience is OTJ training only.
Warren Lee
Mobile , Alabama USA - Monday, July 15, 2002 at 20:03:25 (PDT)
looking for example test for third grade stationary engineers license.
manuel,estrada
houston, texas usa - Monday, July 15, 2002 at 07:37:41 (PDT)
Hello this is Nelson and i'm a building engineer trainee for School District of Philadelphia, and i was looking for information on high and low pressure boilers. I'm looking forward to enjoying this site and it's good to see that there is a site like this. Thank you
Nelson King
Philadelphia, PA U.S.A - Saturday, July 13, 2002 at 16:16:33 (PDT)
I NEED SOME INFORMATION ABOUT FACTORS THAT ARE IMPORTANT IN TUBE EXPANDING IN FIRE TUBE BOILER.
naser jaberi
arak/iran, markazi iran - Saturday, July 13, 2002 at 02:27:44 (PDT)
Very interesting site. I am a STATIONARY ENG/HVACR/DDC was on a job search mission when I ended up here. Thanks!
Jeffrey Thompson
CT USA - Thursday, July 11, 2002 at 19:53:24 (PDT)
I just graduated from Mass Maritime Academy for commercial boilers. I should receive my state boiler licence nexted month. I already possese my freon recovery license and looking foward to a career in operating high pressure boilers. I could relocate if the right job offer came my way.
philip a. spera
Braintree, Massachusetts USA - Thursday, July 11, 2002 at 14:48:23 (PDT)
I wish I did what you do instead of making piano benches. Your site looks great. none.
Cynthia
San Diego, Ca US - Wednesday, July 10, 2002 at 06:39:08 (PDT)
Like to read the forum.
Paul Schwichtenberg
St>peter, MN usa - Sunday, July 07, 2002 at 00:39:09 (PDT)
I WAS WONDERING IF YOU COULD PLEASE LEAD ME IN THE RIGHT DIRECTION FOR GETTING MY BOILERS LICENSE. MAYBE WHAT BOOK OR CLASSES TO TAKE.
RICHARD BRAVO
ANAHEIM, CA UNITED STATES - Thursday, July 04, 2002 at 14:38:05 (PDT)
exceelent
gopendra saraswat
thirukkadaiyur, tamil nadu india - Wednesday, July 03, 2002 at 00:20:36 (PDT)
hi!
ASHISH M. THAKRE
akola, m.h. USA - Saturday, June 29, 2002 at 10:08:54 (PDT)
i am working as a mechanical consultant and i would like to more about your boilers, heatexhangers etc.
Tamer hendawi
GiZa Cairo, Cairo Egypt - Saturday, June 29, 2002 at 00:17:15 (PDT)
I'm a Boilermaker with 20 years of experince in large power house boilers. I would like to find a book on small boilers, so I can help a friend with a inspection company. He is starting to inspect commercial and industrial building with small steam and hot water boilers. Any help would be appreciated.
Guido A. Volpe
Clyde, Michigan U.S.A. - Wednesday, June 26, 2002 at 09:26:08 (PDT)
i like to share agood knowledge.
azhar
pasir gudang-johor, johor malaysia - Monday, June 24, 2002 at 20:39:47 (PDT)
I'm always researching Boiler companies and suppliers that's how I got here.
Charlesetta Walls / St Cloud Welding
St Cloud , Florida USA - Monday, June 24, 2002 at 10:59:05 (PDT)
I like your page very much. We have steam traction engines that we show and play whith.
Bill Newell
Marcellus, Mich USA - Sunday, June 23, 2002 at 14:00:43 (PDT)
I was interested in your product, because, I have purchased a house that had a Stone Steel in it and wanted to know more about the history of it. Thanks.
Dianne Kitchens
Nettleton , MS USA - Thursday, June 20, 2002 at 21:17:59 (PDT)
i need boiler info for Thompson Cochoran Group UK, please contact me, all agents and dealers of thompson cochran, on my email for saling boilers.
adil
lahore, punjab pakistan - Tuesday, June 18, 2002 at 22:18:03 (PDT)
I am interested in knowing the latest developments and technical queries on the subject of Steam Plants
M. Abdul Razzaq Khan
Dammam, Saudi Arabia - Tuesday, June 18, 2002 at 06:52:37 (PDT)
Have oil well supply boiler, 30hp portable locomotive style. retubed in 1976 then used to drll oil well. Now located at local historical museum. to run oil well drilling display. Builders tag is gone and only numbers is what appeers to be a serial number. Local traction engine guys have inspected and hydrotested. are going to have trouble running this boiler in Ohio. Mike
Mike Coyer
portage, ohio usa - Saturday, June 08, 2002 at 19:44:31 (PDT)
Great stuff just got out of the navy USS PONCE LPD-15 2nd class BT working on the ohio 3RD class eng license
Andrew Henney
Bellevue, Ohio USA - Thursday, June 06, 2002 at 15:58:38 (PDT)
Great site. If anyone has needs for training of personnel or for licensing under NIULPE please contact me. We also provide training for Gas Turbines, Combined Cycle, Steam Turbines, and Generators. Also a full line of mechanical maintenance courses.
Daniel L. Anderson
Bradenton, FL. USA - Thursday, June 06, 2002 at 11:32:47 (PDT)
I'm an old us navy chief boiler tec ret. with 21 yrs. Battleship M-type 600psi. I'm now land based lic. Statioary Enginer.there is life after the navy.lol
Richard F. Smith
Port Orchard, WA usa - Thursday, June 06, 2002 at 10:39:41 (PDT)
I am currently a 3rd class stationary engineer working for Noveon Specialty Chemicals in Akron. I started in this field when I joined the U.S. Navy back in 1974. I am enjoying reading all the guest entries from all over the world. I am also sure that this will be a very interesting site for all kinds of information and help. THANKS for the great web site.
Keith M. Rutherford
Uniontown, Ohio U. S. A. - Wednesday, June 05, 2002 at 16:30:49 (PDT)
My name is Edmund Marco and it's a pleasure to sign your guest book. I work for an advertising agency in London. Our agency represents direct marketing companies that are involved in the marketing of products as seen on TV in England. Most of the infomercial products come from the U.S. but then again we export our talents as well. My brother has appeared in infomercials in the U.S. advertising various products. I think it's hilarious that English people respond so well to American products while Americans tend to respond well to sales people who have an English accent! none.
Edmund
London, Kent England - Friday, May 31, 2002 at 22:40:44 (PDT)
I'm responsiable for 51 boilers spread out over 27 sites for a school system. We are in the process of building 15 new buildings and have a lot of good boilers too sell. i LIKE THIS SITE AND HOPE IT CONTIUES.
Donald R. Smitson
Springfield, Ohio USA - Friday, May 31, 2002 at 11:09:58 (PDT)
This is a good site
Naveed Ahmed Riaz
Gujranwala, Punjab Pakistan - Thursday, May 30, 2002 at 23:00:30 (PDT)
I am working as senior manager operations in PPN 330MW cc Power Plant. I worked in Neyveli , Kakinada rolls royce and now in ppn plant. I request you to send details on BOE examinations enable to get for all of our engineers eligible around 30. thank you
B.V.Udhayakumar
thirukadaiyur, tamilnadu india - Thursday, May 23, 2002 at 22:30:43 (PDT)
Im requesting information about the operation of high pressure steam boilers.
Ernesto Jimenez
San Diego, California U.S.A - Wednesday, May 22, 2002 at 08:53:55 (PDT)
I have been working on low pressure steam boilers for two years, and want to take the stationary engineers license test for Illinois. I have had trouble getting info to do this. Can you help?
Eric Kline
Bloomington, Illinois USA - Sunday, May 19, 2002 at 06:18:02 (PDT)
This place is great for getting technical information on boilers and boiler related equipment.
L&L Boiler Maintenance, Inc.
Montoursville, Pennsylvania U,S.A. - Saturday, May 18, 2002 at 19:05:21 (PDT)
I work for DryClean USA and work with small boilers. I have found this sight very interesting and will come back again. Thanks to those who work on this sight.
Roger Williams
Margate, Fl. USA - Friday, May 17, 2002 at 13:43:16 (PDT)
I am a chief engineer in merchant navy.I would like to know information about boiler surveyors examination held in India.
B.A.V.L.N.Rao
vishakapatnam, Andhra pradesh India - Wednesday, May 15, 2002 at 09:35:15 (PDT)
Very glad this site exists
Archie V. Spangler Jr.
Hazard , KY USA - Wednesday, May 15, 2002 at 05:20:47 (PDT)
Great site, BZ - Bravo Zulu (that's "Navalese" for well done) . I am a retired U S Navy Boiler Technician Chief Petty Officer (Chief BT for short). I am currently a 3rd Engineer working on my Second's. Anyone remember the formula for calculating the jump to hyper space? :-)
David W. Sawicki
Fairhaven, Massachusetts USA - Monday, May 13, 2002 at 23:16:16 (PDT)
Very useful website to power professionals, esp. to me from China.
chen minghua
Hangzhou, zhejiang China - Wednesday, May 08, 2002 at 17:07:27 (PDT)
I m a 2nd Class Boiler Engineer
Naveed Ahmed Riaz
Gujranwala, Punjab Pakistan - Saturday, May 04, 2002 at 05:13:21 (PDT)
I need information about steam boiler (function, parts,operation and maintenance)
Aurelio Vera
Arequipa, Peru - Thursday, May 02, 2002 at 16:17:29 (PDT)
very information & functional site, worth going frequently.
chen minghua
hangzhou, zhejiang China - Sunday, April 28, 2002 at 17:06:11 (PDT)
I'm a second class Stationary Engineer, and I have worked in Power Houses and steam plants for about 25 years. It's nice to have a place to go to get questions answered.
Dan Bearden
Pekin, Illinois US - Saturday, April 27, 2002 at 21:56:39 (PDT)
Q.A. Manager Vulcan-Hart Company Steam Engineerng Division
Mike Reckner
Troy, OH USA - Friday, April 26, 2002 at 04:05:25 (PDT)
Extremely helpful site.
Mark M. Jones
Sun Prairie, Wisconsin USA - Monday, April 22, 2002 at 09:15:32 (PDT)
Great Site. I'm a 22 year Navy Steam engineer who is currently teaching Navy Officers at Surface Warfare Officers School. I find your info, along with some of your links valuable in creating analogies to teach the Navy Junior Officers about how different aspects of the Steam plant function. Thanks for your support! I'm always looking for old shipmates from N.K. Perry, Barry, La Salle, Lexington, Trippe and Willamette.
Ted DeArruda
Newport, R.I. USA - Thursday, April 18, 2002 at 06:11:03 (PDT)
I am a 3rd class state of ohio stationary engineer and also a hvac/r mechanic for a suburban hospital. I served 3.5 years on the USS MORTON DD-948 out of Pearl Harbor. 1275 lb plant as a top watch E-5. 1978-1981 I would like any info on the education required to become a boiler inspector. Thank you for your reply.
Paul Schmalz
Valley View, Oh. USA - Wednesday, April 17, 2002 at 15:26:12 (PDT)
I hope to here from some past frinds
Rick J Sumner
foster, ky. bracken - Tuesday, April 16, 2002 at 17:48:17 (PDT)
THEGreatest Manufacturer of hot water and steam boiler and package of boiler room in Midlle East . Want to have The American manufacturer of boiler catalogs Packman co. - Sadat st. - basij st. - Imam Khomeini st. - Isfahan - I.R.Iran
Soheil MIrzazadeh
Tehran, Tehran I.R.Iran - Sunday, April 14, 2002 at 09:01:19 (PDT)
I just like to know more information on boilers,its specifications and its usage,anything to do with boilers.
Alvin
singapore, singapore - Thursday, April 11, 2002 at 03:57:00 (PDT)
Great site, keep up the good work
Paul Milligan
Charlottetown, PEI Canada - Friday, April 05, 2002 at 18:31:44 (PST)
would like more info on naval boiler books.
mike barraclough
burlington, nj usa - Tuesday, April 02, 2002 at 11:09:04 (PST)
Fourth Class PE just found your page seems to be very good .
William R F Carrigan
Fort St. John , British Columbia Canada - Sunday, March 31, 2002 at 09:08:22 (PST)
I'm a student at Lincoln tech and I would love to know more about you Boiler room
keith williams
jersey City, NewJersey Hudson - Thursday, March 28, 2002 at 09:48:43 (PST)
would like to get a listing on your site
mark smith
branford 06405, ct usa - Thursday, March 28, 2002 at 04:37:39 (PST)
Doing litigation research on asbestos issue. Need to contact former BT's from carrier Shangri La circa mid 1960's. Specifically, the details of the repair, overhaul, installation, removal etc of various feed pumps in the engineroom. Also if anyone recalls a BT John Powers of the Shang. Thanks. Ken Lord.
Ken Lord
Williamsport, Tennessee USA - Wednesday, March 27, 2002 at 10:14:30 (PST)
Found a lot of info. the first time around. I have been in this field over thirty years starting with the Steamship Delta Queen Port of Cincinnati Ohio. I am currently involved in teaching Stationary Engineers Licensing classes at University of Miami-Hamilton Ohio,University of Cincinnati Ohio & Greatm Oaks Voc. School Sharonville Ohio. Also trainer for Local 20 International Union of Operating Engineers Cinti. Ohio. I have done in-house training for Cinergy & Dayton Power & Light Utilities Co. If anyone needs in assistance in training needs or wants to share info. contact me at ronbutler20@hotmail.com Thanks Ron Butler
Ron Butler
Hebron, Ky U.S.A. - Saturday, March 23, 2002 at 17:30:15 (PST)
I just found this site, I am a statinary engineer in a power plant. Operation of high presure boiler, also wood fired boiler at engine shows. Have two of my owen. Good site.
Paul Woodworth
Ursa, IL. USA - Thursday, March 21, 2002 at 17:59:01 (PST)
Very Interesting site. I have been in the boiler business for over 2 years. Started in solid fuel... went to N Gas and Propane. Very knowledgeable in applications, fire tube to low water content boilers. Thank you,
Ms. Priti Nayak
Ahmedabad, Gujarat India - Tuesday, March 19, 2002 at 03:28:23 (PST)
I am a engineer with a grade A engineering license in high presure boiler Operations
D. O. Cleveland Sr.
Philadelphia , Pennsylvania united states of america - Wednesday, March 13, 2002 at 21:05:26 (PST)
please send info on used boilers wood fired thanks
alan raymond
ashland, me usa - Wednesday, March 13, 2002 at 05:11:06 (PST)
Looks like a very hepful site! Condensate Problems need a little insight. 7am-3pm M-F 1-724-964-8861 ext.3261 thhrefurbishor@aol.com
Mike
Struthers, Ohio U.S.A. - Tuesday, March 12, 2002 at 16:41:45 (PST)
nice site
Pat Collins
Livonia, Mi USA - Thursday, March 07, 2002 at 14:50:03 (PST)

This is an excellent forum to share current data.My company,Novacon Energy Systems Inc. has developed a process for reducing multiple emissions emanating from power plants and boilers that burn coal,wastes,petroleum and other fuels. The Process uses an inexpensive naturally occurring sorbent called "Termally Active Marble"-TAM that concurrently improves boiler efficiency. I would like the opportunity to share my verified data and answer your questions regarding its use in a varity of combustors.
Stephen H. Baer
Bedford , New York USA - Thursday, March 07, 2002 at 14:29:40 (PST)

NO COMMENTS
RAJESH WALIA
AHMEDABAD, GUJRAT INDIA - Thursday, March 07, 2002 at 02:44:30 (PST)

I represent BIB Cochran Ltd, a company that provides steam and hotwater solutions on a global basis. Our company is more than 100 years young with a range of boiler outputs from 50kW (commercial)up to 24000kW (industrial). This is my first visit to Boilerroom.com and after seeing the site it will not be my last.
Mr. Bob Slater
Annan, Dumfries and Galloway Scotland, UK - Wednesday, March 06, 2002 at 06:31:40 (PST)

Hi, just found this site while trying to find seasonal part time power plant job. Have city of Los Angeles unlimited horsepower steam engineers license with turbine endorsement and 20 years of navy boiler experience up to 1200 psig and down to hot water boilers and every thing in between. Spent 12 years as building engineer with LA City school district and 22 yrs as a supervisor of a 15mgd waste water reclamation plant with 5mgd reverse osmossi. If any one knows of a temp or part time job in my area, I'd sure appreciate them letting me know. Thanks, great site!!!
R.F. Gregor
Grand Prairie, Texas Good 'ol US of A - Sunday, March 03, 2002 at 13:53:21 (PST)

I'm a Machinist's Mate in the Navy right now and researching a career in stationary engineering. I spent 5 yrs working on 600lb boilers and steam turbines, now I work with cryogenic systems. I'm looking for any schools that train civilian stationary engineers.
Ryan Fowler
Kingsville, TX - Saturday, March 02, 2002 at 11:42:25 (PST)

very useful site.
Jack Carter
washington, dc - Saturday, March 02, 2002 at 05:53:56 (PST)

I would like to upgrade my license to second class red seal. Is there any websites or literature that can help me. Thank You
John Mora
Hackensack , New Jersey United States - Tuesday, February 26, 2002 at 18:35:27 (PST)

Does anyone know of any reports or regulations issued anywhere that takes issue with the safety aspects of 12 hour shifts for boiler operators? Either in the negative or affirmative. Thank You, Leo Evans
Leo Evans
West Palm Beach, Florida United States - Monday, February 25, 2002 at 09:38:56 (PST)

Great site, will explore further
Glenn Britland MP
seekonk, ma usa - Sunday, February 24, 2002 at 10:39:54 (PST)

add me to your mailing list please
francis r skehan
new york, new york usa - Friday, February 22, 2002 at 13:16:10 (PST)

Glad to see That there is a site for pepole like us to go to if the need to reseach a problem
Charles Caple
Lackawanna, NY USA - Wednesday, February 20, 2002 at 19:46:27 (PST)

I am a Unit Controller operating at a Power Station. We have 2x350 and 2x375 MW Toshiba Turbines supplied by 2 John Thompson and 2 ICAL pulverised fuel brown coal boilers. I am currently involved in a project to replace our outdated control system for the station and fuel plant with a DCS system (~48000 I/O), and provide a complete business control room.
Peter Findlay
Yallourn, Victoria Australia - Monday, February 18, 2002 at 22:36:11 (PST)

Has anyone tried those new Burnham Classic Radiators on a one-pipe steam application? I am a little hesitant because they need special adapter bushings and only can handle 1" valve spuds. I'm concerned that they won't drain awaty the condensate to well. Also, I'm looking for some quality low pressure residential steam quages with readings in ounces. Mad Dog
Matt Sweeney
Floral Park, New York United States of America - Monday, February 18, 2002 at 13:26:51 (PST)

I am a Plumbing & Heating Contractor From Long Island, N.Y.. We specialize in steam heating and I am thrilled to have stumbled upon this web site. Matt Sweeney
Matt Sweeney
Floral Park, N.Y. United States of America - Sunday, February 17, 2002 at 14:22:35 (PST)

Very Informative site! I'm a 3rd Class Power Engineer currently working on my 2nd Class license. Thank you for the great information available.
James Meisner
Quispamsis, New Brunswick Canada - Saturday, February 16, 2002 at 07:40:15 (PST)

looking for Raypak Boiler Dist.
Bill McFadden
Watervliet, Michigan - Tuesday, February 12, 2002 at 05:19:14 (PST)

WHAT AN EXCELLENT & HELPFULL SITE -
RICK EDWARDS
New Buffalo, Michigan USA - Monday, February 11, 2002 at 05:59:41 (PST)

GREAT SITE....WE ARE A STOCKING !!!! FIREYE REP...AND HONEYWELL SAFEGUARD REP.....IN MEMPHIS TENN ...ARK...MISS
MEMPHIS CONTROL CENTER
MEMPHIS, TN USA - Friday, February 08, 2002 at 12:21:36 (PST)

Looking for a school on boiler operation.
Glenn Cloyd
Newberg, OR USA - Thursday, February 07, 2002 at 16:47:43 (PST)

1st. class operating engineer lic. A/C ,Boilers ,Turbines and Internal Combustion Engines. Working now for entergy in new orleans,la.
Raymond C. Fernandez
Marrero , LA USA - Thursday, February 07, 2002 at 15:21:04 (PST)

Very informative site. I run a boiler inspection agency and always refer my customers to this site when I can't come up with the information they're looking for. Thanks Boiler Room
Kathleen
- Thursday, February 07, 2002 at 11:22:54 (PST)

Thank you.
Therese Welker
Cincinnati, Ohio USA - Thursday, February 07, 2002 at 07:58:31 (PST)

I am looking a boiler fee water heater useing the energy from frame 5 gas turbine on the axhaust
LUIS BORJAS
MARACAIBO, ZULIA VENEZUELA - Monday, February 04, 2002 at 09:17:12 (PST)

I AM INTERESTED IN BEING A STATIONARY ENGINEER THIS WB SITE HAS GIVEN MY A PLACE TO START
JAMES COSGROVE
LOMBARD, IL USA - Thursday, January 31, 2002 at 17:30:03 (PST)

Just general question about residential steam heat.
Len Emery
West Haven, CT USA - Thursday, January 31, 2002 at 06:49:37 (PST)

Thanks for having me. Sorry about the redundant entry! Regards, Ken Petrocelly (Chief Engineer) CPE,SMA,CFM
Kenneth L. Petrocelly
Haymarket, VA United States - Wednesday, January 30, 2002 at 13:07:48 (PST)

Excellent site. I work for Europes largest steel chimney producer with fabrication facilities in Europe, Australia and Asia - pleased to be of assistance.
Steve Street
England - Tuesday, January 29, 2002 at 08:14:21 (PST)

Searching for position as marine type boiler operator. Searved in U.S.Navy (USS LAFFEY DD-724) as 3rd Class BT and filled 1st Class billet as "Oil King"; trained on 600 and 1200 PSI, Water-tube, B&W Boilers. Willing to relocate for position.
Ronald L. Bowling, Jr.
Hollywood, Maryland 20636 U.S. - Sunday, January 27, 2002 at 12:52:28 (PST)

Congratulations. Interesting and useful page.
Antonio Ant�nez Rueda
Mexico city, D.F. Mexico - Saturday, January 26, 2002 at 12:07:46 (PST)

Good site very helpfull
Bill Sartori
Carlstadt, NJ USA - Friday, January 25, 2002 at 12:21:42 (PST)

Nice information...I'm try to find as many artiles on low pressure boilers as I can. Trying to pass my boilers test.
Bill
Sandusky, Ohio USA - Thursday, January 24, 2002 at 08:39:19 (PST)

I am looking for someone to train operators in our facility to operate low presure package boilers. Please contact for a price quote.
Eugene Peters
Huntington, West Virginia 25705 US - Wednesday, January 23, 2002 at 07:36:44 (PST)

Necesito informacion sobre: Nosmas de instalacion de Plantas de Produccion de vapor, para Hospitales. Si pudieran mandarme, Catalogos sobre Calderos de Vapor, Tuberias para vapor, Equipos de seguridad, accesorios, etc. SI PUDIERA POR FAVOR EN CASTELLANO ATTE. Rufo CHoque Gracias
Rufo CHoque Quispe
Arequipa, Peru - Tuesday, January 22, 2002 at 16:25:40 (PST)

1st class MD stationary Engineers' Lincense. Looking to relocate in South Florida. Need information about state lincencing there as well as best place to seek out employment opportunities. Also have my CFC Universal Certification.
Craig P. Newman
Upper Marlboro, Maryland United States of America - Sunday, January 20, 2002 at 12:17:31 (PST)

Great information on this site. I've saved a few dollars already by finding the information I need. I am becoming more knowledgeable regarding home heating issues. I also know if it is beyond my ability, get a professional!
Paul E Waters
- Friday, January 18, 2002 at 07:48:18 (PST)

All the information in your page is very good. Your Useful On Line Software recommendations are exactly that very useful. Regards Andres
Andres Javier Martinez Farias
Monterrey, Nuevo Leon Mexico - Friday, January 18, 2002 at 05:48:03 (PST)

Dear sir I have acompany which has mills to run those mills we are using steam. So we need to install new boilers but already we have two bilers which are very all so we need to know about boilers with new technology. send us your new productions about boilers. Senanayake & Company KKC Senanayake Sri hemaloka mw Ebertwatte Yatiyana Agalawatte Sri lanka
KKC Senanayake
Agalawatte, Kaluthara Sri lanka - Thursday, January 17, 2002 at 03:36:32 (PST)

LOOKING FORWARD TO SPENDING PLENTY OF TIME HERE. NEW BLACK SEAL.
AUSE DYER III
NEWARK, NJ - Wednesday, January 16, 2002 at 20:37:30 (PST)

I distill for essential oils I have a 3hp burnham steam boiler looking for somthing larger 9.5 hp preferably
wally brueske
sonoma, ca. - Sunday, January 13, 2002 at 17:24:44 (PST)

just browsing
S Krawczyk
Wood Dale, IL USA - Wednesday, January 09, 2002 at 20:34:43 (PST)

I am a owner of boiler industrial controls
Sarfraz Ahmad
LAHORE, PUNJOB PAKISTAN - Wednesday, January 09, 2002 at 09:39:46 (PST)

Looking for a Second Class and possibly a Third Class Stationary Engineer in a Manufacturing facility. Unionized and paying good money. Excellent Website and would like to speak anyone looking for a great opportunity in the Toronto area.
Robert Davis
Toronto, Ontario Canada - Monday, January 07, 2002 at 14:33:07 (PST)

I'am the Manager of the steam plant at the University of Wyoming. It is a coal fired plant which produces steam for the campus community. I enjoy your web page and the information available from it. Keep up the good work. Regards, Jim Brown
James L. Brown
Laramie, Wyoming USA - Monday, January 07, 2002 at 12:48:40 (PST)

good site
srikanth
chennai, tn india - Friday, January 04, 2002 at 10:49:22 (PST)

Great site for information-Thanks and keep up the good work!
Scott Hodges
Washington. DC., USA - Thursday, January 03, 2002 at 04:04:31 (PST)

Great Site.
Stephen Bush
Orange, Texas USA - Wednesday, January 02, 2002 at 13:43:55 (PST)

I have been working around boilers for 22 yr hog fuel and oil boilers. 21.5 year spent with a pulp mill and now I am work for a stud mill as a Boiler/Kiln operator.
Lyle E Houk Jr.
Port Angeles, Wa USA - Tuesday, January 01, 2002 at 13:28:44 (PST)

Looking forword to useful imformation.
Paul Schwichtenberg
St.Peter , MN USA - Friday, December 28, 2001 at 19:16:16 (PST)

This Is An Interesting Site. Thanks For Creating It. Sincerely, Ward Olsen
Ward Olsen
Renton, Washington USA - Thursday, December 27, 2001 at 14:45:51 (PST)

excelent site
Wayne Tanner
Caldwell, Idaho - Monday, December 24, 2001 at 10:06:13 (PST)

We are looking for boiler manufacturer in the European Union for disign
Gunvant nayak
Ahmedabad, Gujarat India - Sunday, December 23, 2001 at 01:10:28 (PST)

Wish I have more information about Canadian Instry too
Andy
Toronto, Ontario Canada - Saturday, December 22, 2001 at 10:29:21 (PST)

I am just starting I will be taking my Specialist exam in January 2002. Trying t find more info on boiler's.
D.K. Smith
Columbia Hieghts, Mn. USA - Friday, December 21, 2001 at 12:02:50 (PST)

INterested to meet boiler repair and manufacturer companies
AMAR BENINAL
LONG ISLAND, NEW YORK USA - Friday, December 21, 2001 at 06:26:38 (PST)

Greetings, We work with engineers in China to introduce American boilers to China. If your company wants to expand your business to China, please contact us at 215-859-8378 or email us. We will be your rep in China. We have opened a major Trading Center in Hangzhou (about 100 miles from Shanghai) that specializes in boiler trade. By the way, this is an excellent web site for the boiler industry! Nice job. Kevin
Kevin Chen (Vista Products Company)
Lansdale, PA USA - Saturday, December 15, 2001 at 17:15:52 (PST)

We at Jackson Purchase Medical Center in Mayfield, Ky. have been waiting for a Ky.State Boiler Inspector for 6 months to authorize the use of our new steamer that we need so desperatly. Can you Help?? We were told by the Triangle company that the boiler inspector has quit and a new replacement has not been hired. Help us. Thanks
sandy gossum
mayfield, ky usa - Wednesday, December 12, 2001 at 18:48:58 (PST)

I work in a power house for the Dept. of Corrections, and am looking for any information on boiler training classes in NYS.
Amanda S.
Dundee, NY USA - Monday, December 10, 2001 at 23:31:59 (PST)

This is the kind of forum, I have been looking for a long time.
Khalid Mahmood
Toronto, Ontario Canada - Sunday, December 09, 2001 at 14:15:20 (PST)

Great site I am an HVACR service manager for a mechenical contractor.
Edward E Smith
youngstown, Ohio 44515 - Sunday, December 02, 2001 at 07:24:16 (PST)

Twenty years experience in refinery operations and looking for work.
John McAdams
Hurley, MS. USA - Wednesday, November 28, 2001 at 06:07:51 (PST)

Great Site! Anyone have information on how to go about transferring a U.S. Merchant Mariner's Engineer's license to a stationary engineer's license?
Glen Moore
Castro Valley, California USA - Tuesday, November 27, 2001 at 16:00:07 (PST)

great site
drew belotti
millbrook, new york USA - Tuesday, November 27, 2001 at 11:19:40 (PST)

will anyone please tell me how to get information on boiler efficiecy certficate exams in india,which will be useful in getting a job in power plants or suger factories.
prasad kris
mumbai, maharashtra india - Tuesday, November 27, 2001 at 05:47:53 (PST)

I became a fireman in a boiler-room in 1961 or 62. Had two C E s' - @ 75,000 eva. per hr. each. One Riley _ @ 120,000 " " ". One B & W - @ 200,000 " " ". All were fired on pulverized coal. Job.. More exciting than a face to face with King Kong! Even now I still have nightmares! Can see those old rascalls disintergrating in my face! Eventually left this job, and continued my working life as a powerhouse operator in three other boiler rooms. This brought me to my retirement, almost two years ago. Over 35 years--well somebody had to do it. Leon Sweatman
William Leon Sweatman
Trion, Georgia 30753 U S A - Sunday, November 25, 2001 at 18:50:06 (PST)

please send me installation instruction for combination boiler and normal boiler (Gas Boiler) tankyou
ghasem alani
chatham, kent uk - Sunday, November 25, 2001 at 13:36:31 (PST)

This is a great website. I found some great info. I sell boilers for the Miura Boiler company. Email me if your looking for any information.
Spencer Gill
Toronto, Ontario Canada - Friday, November 23, 2001 at 08:59:06 (PST)

i'm a student of a college, and i need a complete information and data about "wastes fuel boiler", and i hope some of you can help me, thank you...
nata sembiring
yogyakarta, diy indonesia - Thursday, November 22, 2001 at 20:01:37 (PST)

Great site, Just what I was looking for.
Richard Mason
Albuquerque , NM U.S.A. - Tuesday, November 20, 2001 at 06:48:46 (PST)

Interesting site for those of us in the trade. Looking forward to spending more time here and sharing information on advancing to second and first engineer licences.
Don Elkins
Boston, Mass. USA - Saturday, November 17, 2001 at 06:40:52 (PST)

This site is very helpful and definitly is a need for new engineers. I am a 3rd Class Power Engineer and the discussion forums are a great tool for learning and expanding my career as an engineer. Hats off and a round of applause for the people who took the time and effort to design this site, I will hitting this site often.
Allan Greene
Prince Rupert , British Columbia Canada - Tuesday, November 13, 2001 at 16:46:41 (PST)

I am searching the email address of my beloved father Mr. Muhammad Bashir (Inspector ARAMCO). This is very important for me.Thanks
Muhammad Zaheer Bashir Moughal
Lahore, Punjab Pakistan - Tuesday, November 13, 2001 at 04:45:26 (PST)

I am currently studing to be a mechanical engineering technologist and i just found your site. Very good site. I will be back soon.
Wayne Clark
CBS,NF, Canada - Tuesday, November 06, 2001 at 09:35:24 (PST)

LATER COMMENTS
RAVINDRA BIDRE
MUMBAI, MAHARASHTRA-INDIA - Sunday, October 28, 2001 at 08:12:06 (PST)

Please I will so much appreciate you send me your company's product/business information. Regards, Kings
kingsley U.
Festac-Town, Lagos Nigeria - Saturday, October 27, 2001 at 07:27:36 (PDT)

Great site!! I am studying for my HIGH PRESSURE BOILER OPPERATORS LIC. AND MY 3RD CLASS REFRIG IN DETRIOT.
Brian Snoes
lincoln park , mi usa - Friday, October 26, 2001 at 23:39:46 (PDT)

Just found your web site, was looking for information on the edsion electric industitry exam. Found lots of great information with your forum. you all are doing a good job, if anyone knows of employment positions contact me, I have exensive experence in waste to energy, and fossil fuel boilers (5 different plants,2 USN) thanks.
skip bartholomew
Mt. Zion, IL. Good Ole USofA - Thursday, October 25, 2001 at 15:41:32 (PDT)

I'm a First Class Power Engineer currently employed as Chief Engineer for the largest Canadian Brewery west of Toronto. I've been involved in two major new plant startups in my career and look forward to what the coming years have in store for me...I'm hoping to be able to catch the Cogen wave!
Mike Pilling
Vancouver, BC Canada - Tuesday, October 23, 2001 at 08:19:42 (PDT)

nice site
thomas kehl
Grand Rapids, Michigan USA USA - Thursday, October 11, 2001 at 11:07:28 (PDT)

JUST STARTED CLASSES FOR 1st CLASS LIC. WENT TO FIND INFO. FOR STUDY AND FOUND THIS PAGE. HEY! GREAT!
Charlie Caple
bflo., n.y. USA - Thursday, September 27, 2001 at 21:17:40 (PDT)

Great Site. I am a Navy Boiler Inspector and just came across this site. Hope to use it a lot. Thanks.
BTCM John Norton
Norfolk, Virginia USA - Wednesday, September 26, 2001 at 05:59:59 (PDT)

My home was built in 1929 and has a steam boiler system. The heating pipes are insulated with asbestos. Is there a product that I can install as a substitute for the asbestos. I have close to 50 feet of 2-3in pipe.
john ebright
wheaton, il usa - Monday, September 24, 2001 at 13:16:47 (PDT)

Just discovered this site. Seems interesting.
Bernie Ondrey
Cranford, New Jersey United States - Thursday, September 13, 2001 at 16:38:39 (PDT)

The company I have worked for, for the past fourteen years will be closing its doors by the end of this year. I need to find new employment in a field that isn't quite as popular as it once was....Boiler Operator, Engineer, Technician, Tender and/or Stationary Engineer, Fireman.
Ed Gorman
Berwick, Maine Untied States - Tuesday, September 04, 2001 at 16:24:44 (PDT)

I am interseted in becoming a boilerroom technician in new jersey,I am looking for schooling on this please help!
mike makowsky
forked river, n.j. united states - Monday, September 03, 2001 at 14:56:35 (PDT)

I look forward to visiting your website often. I am a 2nd class stationary engineer. I am preparing to study for my 1st class ticket. I will probably need help at some point.
mike bates
sydney, nova scotia canada - Monday, September 03, 2001 at 12:45:48 (PDT)

nice site keep it up...
kingsley
lagos, lagos nigeria - Friday, August 24, 2001 at 19:46:33 (PDT)

HAVE 20+ YEARS IN THE TROUBLE-SHOOTING OPERATION AND REPAIR OF CE,BW,FW BOILERS 1200,600 AND 400 PSI,ALSO HVAC EPA CERTIFIED
DENNIS SHROPSHIRE
JACKSONVILLE, FL USA - Tuesday, August 21, 2001 at 10:01:58 (PDT)

Cool site. Very intertaining. I work for univ of Texas power plant. We've come a long way with this old girl.
mark
austin, texas usa - Tuesday, August 21, 2001 at 01:14:49 (PDT)

Engineers Need to speak up and Require their Legislatures to enact more stringent licensing laws. Especially loophole Laws, like the Ohio (Special) Law.
David Bobkoski
Massillon , Ohio USA - Monday, August 20, 2001 at 12:25:03 (PDT)

always looking for seasional boiler operator, low pay.Work in yellowstone in the summer.have 26 cleaver brooks heating boilers. we wellcome retired people. A trailer is helpful. send me a email.
c. mcnab
yellowstone nat. park, wy. usa - Monday, August 13, 2001 at 18:59:09 (PDT)

Just checking out the site.
Pat Collins
Royal Oak , MI U.S.A. - Monday, August 13, 2001 at 11:20:14 (PDT)

why is there not a law that requires any power plant operator[ stationary engineer ] to carry a license?
michael e krueger
jacksonville, illinois america - Monday, August 13, 2001 at 10:27:40 (PDT)

Our club is restoring a 1922 Baldwin locomotive. Several of us need to gain our boiler operator certificate. Ours is an oil fired 2-8-2 Mikado class. Any info is appreciated
Steve
Coos Bay, Or. USA - Monday, August 13, 2001 at 06:49:59 (PDT)

Best website to research employment opportunities. I have been employed as a Cogeneration power Plant Lead Operator for 10 years. Currently seeking to relocate to the State of Florida. However, open operator positions there are scarce. Thank you.
RAFAEL NUNN
ANTIOCH , CALIFORNIA USA - Saturday, August 11, 2001 at 17:15:19 (PDT)

Came back to use the site again and enjoyed it very much. Presently working at a military armaments manufacturer, in the boiler room, as a second class stationary steam engineer.
Thomas M. Drouin
Westbrook, Maine U.S.A. - Wednesday, August 08, 2001 at 14:34:03 (PDT)

I find your site a good source of information.
Gunvant Nayak
Ahmedabad, Gu - Thursday, July 19, 2001 at 22:22:58 (PDT)

i would like to have a new information for boilers
eng.magdy amer
cairo egypt, egypt egypt - Thursday, July 19, 2001 at 06:13:29 (PDT)

I am looking for an asbestos gasket similar to those used in firetube and firebox boiler doors. I want to do some testing.
Don Smith
Ithaca, NY US - Tuesday, July 17, 2001 at 13:08:55 (PDT)

in line for a job in gas power plant. have knowledge of coal fired, but need info on g.e.7f8? gas turbine. anyone?
bill shelton
effingham, illinois usa - Monday, July 16, 2001 at 19:37:20 (PDT)

We would like to get some information from you on how to list our company on your web site.
Jeff Breeden
Robertsdale, AL USA - Monday, July 16, 2001 at 10:51:52 (PDT)

MANAGER OF GRUPO DE APOYO LOGISTICO S.A. SERVICE OF BOILERS
DANTE VALVERDE L
LIMA, LIMA PERU - Tuesday, July 10, 2001 at 02:57:19 (PDT)

Nice web page.
Pat Collins
Livonia, Mi USA - Monday, July 09, 2001 at 20:46:23 (PDT)

Very good place to find interesting info about all kinds of boilers.
Nicolaos Giouvan
THESSALONIKI, GREECE - Wednesday, July 04, 2001 at 13:34:16 (PDT)

Does anyone know any history on William Tod of the same named company? Was he scottish as I am trying to trace links of our family.
Stuart Tod
Castletown, Caithness Scotland - Friday, June 29, 2001 at 22:35:48 (PDT)

I am a 15 year vet in the boiler field both as an operator and inspector for the state of california. I sit on the board for the rewrite of the Cal boiler code and am willing to field any question pertaining to SF & LA & Cal. Codes.
Harold Klobukowski
San Lorenzo, Ca USA - Tuesday, June 19, 2001 at 11:44:35 (PDT)

Great Site
Ken Donaldson
Corvallis, ore USA - Friday, June 15, 2001 at 06:01:53 (PDT)

I have 25 years experience with tube removal, tube installation, and tube cleaning equipment for the heat transfer industry. If I can help someone with information on these tools I will. Great Site - Keep up the good work Boiler Room!
Keith Mitchell
Dayton, OH USA - Tuesday, June 05, 2001 at 13:49:07 (PDT)

I have 25 years experience in tube removal,tube installation, and tube cleaning equipment for the heat transfer industry. I'm happy to assist anyone if they have questions related to these tools. Great Site -Keep up the great work Boiler Room!
Keith Mitchell
Dayton, OH USA - Tuesday, June 05, 2001 at 13:43:14 (PDT)

Hello! You make a good job, here. Good luck!
Mihai badescu
Bucharest, Romania - Tuesday, June 05, 2001 at 04:11:23 (PDT)

Wish you'd have been here 20 years ago.
T.L. Brace
Massillon, OH U.S.A. - Sunday, June 03, 2001 at 14:32:46 (PDT)

20 year military boiler tech looking for career after retirement open to location suggestions
Denton Moody
seabrook, sc - Friday, May 25, 2001 at 13:30:29 (PDT)

20 military boiler tech looking for career after retirement
Denton Moody
seabrook, sc - Friday, May 25, 2001 at 13:28:18 (PDT)

Just found out about Boilerroom.Com from a friend.
Ray Remus
Spotswood, New Jersey USA - Wednesday, May 16, 2001 at 18:35:54 (PDT)

ERP consultant
wendy
malaysia, malaysia malaysia - Wednesday, May 16, 2001 at 02:42:30 (PDT)

Very nice site! One of the frequent advise givers is from Cleveland; may I have this person's email address?
Mike Rhodes
Cleveland, OH - Sunday, May 13, 2001 at 15:26:10 (PDT)

Fine site
Rennie
MALTA (Europe) - Tuesday, May 08, 2001 at 13:06:46 (PDT)

Very nice sit great resources,
Richard Morin (La Brasserie Molson )
Montreal, Qu�bec canada - Monday, May 07, 2001 at 09:29:49 (PDT)

Being an instructor in marine engineering, I find your site a good source of information.
jorge s. factuar
manila, philippines - Sunday, May 06, 2001 at 19:45:37 (PDT)

ty this site is wonderful,i showed it to my husband he will visit more often. he is a stationary engineer.
amy costa
sheffield,lake, ohio usa - Tuesday, May 01, 2001 at 13:33:26 (PDT)

Looking for a few answers to a couple of questions, also looking to talk to other oil burner techs. THANKS, Ed
Edward M. Fowler
Canaan, Maine US A - Sunday, April 15, 2001 at 05:53:27 (PDT)

Looking for a few answers to a couple of questions, also looking to talk to other oil burner techs. THANKS, Ed
Edward M. Fowler
Canaan, Maine US A - Sunday, April 15, 2001 at 05:52:06 (PDT)

nice sit great resources,
Gary Mckenzie
Casselton, North Dakota US - Thursday, April 12, 2001 at 18:09:16 (PDT)

You have a very well constructed web site,keep up the excelent work.rjl.
Ramon J. Long Jr.
Brockport, NEW YORK U.S.A. - Friday, April 06, 2001 at 21:08:06 (PDT)

i wont this job and hello to all
trevor
helifax, ns canada - Tuesday, April 03, 2001 at 05:45:34 (PDT)

Excellent website. Have Ohio first class stationary eng. licence 35+ years-still enjoy technology.
Dan Stroia
North Canton, Ohio USA - Sunday, April 01, 2001 at 19:37:11 (PDT)

i am working as jr. engg. in 25 mw thermal power plant in instrument deptt.. i wants carrier in power plant automation... some guide me....
gajanan ingle
bhilai, chhattisgarh india - Saturday, March 31, 2001 at 06:04:45 (PST)

I am new to this site and I am a National Board Commissioned boiler inspector. I would like to know if there is a need for inspectors in east Tennessee? If there is, who could I contact?
Bill Neely
Ragley, LA. USA - Saturday, March 17, 2001 at 18:14:11 (PST)

I have Ontario Second Class Stationary Engineer, with experience in medium sized steam and co-generation(gas & steam turbines), and now do service work on my company's line of up to 300-hp HP steam boilers, including water treatment services for customers.
George Larose
Hamilton, Ontario Canada - Thursday, March 15, 2001 at 15:46:57 (PST)

JUST FOUND THIS,LOOKS REAL INTERESTING
DEWAYNE,CD
MODESTO, CA USA - Tuesday, March 13, 2001 at 19:40:45 (PST)

Lead Operator AEP/CSW Operations
Michael Daugherty
Lakeland, Florida USA - Monday, March 12, 2001 at 21:15:22 (PST)

A very usefull and interesting site.
Tasos liovas
Toronto, Ontario Canada - Sunday, March 11, 2001 at 16:29:27 (PST)

I find the boiler room to be very informative
Tom Stanton
Sandwich, MA USA - Friday, March 09, 2001 at 06:13:02 (PST)

Very informitve site i come here alot when i need info.
Jim
Groveton, New Hampshire U.S - Tuesday, March 06, 2001 at 22:59:51 (PST)

VERY INTERESTED SITE. I WOULD LIKE TO PARTICIPATE, REPLY QUESTIONS AND CHANGE IDEAS, IN THE FORUMS, MAINLY WITH THE MAINTENANCE & CHEMICAL CLEANING OF BOILERS. REGARDS JOHN PITSILOS, CHEMICAL ENGINEER, SPECIALIST IN THE BOILERS CHEMICAL CLEANING, jpc@jpchemicalnet.gr www.jpchemicalnet.gr
JOHN PITSILOS
ATHENS, ATHENS GREECE - Tuesday, March 06, 2001 at 08:26:12 (PST)

I am a stationary engineer with Service Resourse Integrated
Jerome Smith
San Francisco, California United States - Sunday, March 04, 2001 at 20:09:13 (PST)

Great site!
Daniel Robidoux
Loretteville,Quebec, Quebec Canada - Saturday, March 03, 2001 at 15:50:48 (PST)

just browsing
mike maskell
sydney, nsw australia - Tuesday, February 27, 2001 at 02:56:03 (PST)

Great site, really enjoyed the forum.
Patrick Kastel
Pennsville, N.J. USA - Sunday, February 25, 2001 at 11:58:07 (PST)

Great Site! I really was impressed with the content and subject matter. It's not that often that you see specific targeted websites that are fun to browse, but yours definately is. Thanks.
Patrick J. Cusick
Mullica Hill, New Jersey USA - Saturday, February 24, 2001 at 13:58:51 (PST)

No comments
Gino Calamo
College Station, Texas USA - Wednesday, February 21, 2001 at 17:48:04 (PST)

Informative site, with lots of great info. Will stop by often.
John Newton
Englewood, New Jersey USA - Wednesday, February 21, 2001 at 16:51:39 (PST)

Just found this site and it look interesting
Robert L. Perry
Rex, Ga United States - Tuesday, February 20, 2001 at 17:34:54 (PST)

very informative
wayne hankinson
port aux basques, newfoundland canada - Tuesday, February 20, 2001 at 15:28:22 (PST)

This is a very interesting and useful site.
George L. Bryant, PE
Columbia, SC USA - Monday, February 19, 2001 at 11:01:47 (PST)

I just found out about your websight today,and have found useful information to my questions.thank you very much
Blake Wilson
Omaha, NE USA - Tuesday, February 13, 2001 at 22:22:31 (PST)

I just found out about your websight today,and have found useful information to my questions.thank you very much
Blake Wilson
Omaha, NE USA - Tuesday, February 13, 2001 at 22:02:09 (PST)

Informative,thanks
Sam Drake
Williamstown, NJ USA - Tuesday, February 13, 2001 at 18:41:38 (PST)

Great site, Great information Thanks
Pat Ganzberger
Brownstown, MI USA - Saturday, February 10, 2001 at 23:49:25 (PST)

Great site! Greetings from Intermountain Boiler Company, your Cleaver Brooks / Nebraska factory authorized representative for southwest/central Idaho and northern Nevada. (208)454-0760. We are looking for an experienced service tech for the Boise area.
Marcus Ellis
Boise, Idaho United States - Tuesday, February 06, 2001 at 15:36:48 (PST)

thank you for the easy access for information.
Douglas Stephenson Sr.
Red Hill, Pa USA - Friday, January 19, 2001 at 19:15:23 (PST)

As a sales man of boiler, it's a Helpful web. for my job. Thank you!
Frederick Wu
Shanghai, Shanghai P.R. China - Friday, January 19, 2001 at 00:47:57 (PST)

I found your website very informative. I'm interested on how boiler works and installation Thank You Jess
Jess Pangan
Cheyenne, Wyoming USA - Wednesday, January 17, 2001 at 21:28:58 (PST)

I viewed your web site and you have a lot of information that's interesting to read. Thank you
Rick M. Rivera
Houston, Tx UNITED STATES - Saturday, January 13, 2001 at 05:12:25 (PST)

ijust found your website,would like to know if you are going to have the new boiler codes on your site.
Raider johnson
vacavilli, c.a. usa - Monday, January 08, 2001 at 12:47:11 (PST)

regards to Mr. mohammad khursheed alam. I think you are from 8th. batch of pakistan Marine Academy.
Qamar Bashir Ahmad
baltimore, Md. USA. - Sunday, January 07, 2001 at 17:11:40 (PST)

THIS SITE IS GREAT AND GOOD TO KNOW ABOUT IT .
Burton&Son heating and cooling
Birmingham , Al. U,S,A - Friday, January 05, 2001 at 08:51:33 (PST)

Saludos a todos los operadores de calderas. He escrito varios libros en castellano sobre calderas. Si alguien le intereza, estoy a en cwt@k-bell.com
Carlos W. Thomasset
Montevideo, Montevideo URUGUAY-AMERICA DEL SUR - Monday, January 01, 2001 at 14:07:41 (PST)

BOILER ROOM TUTOR WAS A GREAT HELP. HOPE TO SEE UP DATES AND POSSIBLE TROUBLE SHOOTING INFO. THANKS
TERRY KELLER
kANSAS CITY MO., MISSOURI UNITED STATE - Sunday, December 31, 2000 at 05:59:43 (PST)

This is an excellent site. The best I've seen!
Fred Thibodeau
Manchester, NH USA - Tuesday, December 26, 2000 at 19:32:53 (PST)

informative web site.Suggest some sites for boiler efficiency facts and emission standards for boiler flue gas
sripati
chennai, tamilnadu india - Monday, December 25, 2000 at 10:19:33 (PST)

I was excited by the information available on your site.I have worked for Weyerhaeuser over 30 years at the PowerPlant operating hog fuel boilers. The old plant is now shut down and I an now running the new Steam Plant with 5 new CB-LE Cleaver Brooks Firetube Boilers.
Rich Adcox
Snoqualmie, Washington U.S.A. - Thursday, December 14, 2000 at 10:24:44 (PST)

this seems like a informitve site
tom loges
browns mills, new jersey U.S. - Tuesday, December 12, 2000 at 19:13:02 (PST)

I am really glad that I ran across your web sit. It's been very beneficial and has given me many trouble shooting ideas in order to solve my particular problems and answer general questions that I haven't been able to get answered from anyone else. Thanks.
Pat Harris
Macomb, IL US - Sunday, December 10, 2000 at 14:51:36 (PST)

You have a real nice site here. Have been on it several times . I have been working with / on boilers for over 50 years, and still can't get away from them, have gone from operator to chief eng. to boiler inspector to repair and sales company owner, and have recently started on model boilers, engines, and trains. It's great to see a site that provides world wide contacts.
Glen Zwicker
West Boudreau, N.B. Canada - Monday, December 04, 2000 at 19:42:13 (PST)

Working the night shift 24/7
Joe Drees
Kohler, Wisconsin USA - Monday, November 27, 2000 at 17:17:01 (PST)

It is a very good site to exchange information and knowledge
Saad Shubrami
RT, Eastren Province Saudi Arabia - Saturday, November 25, 2000 at 22:00:12 (PST)

Great site! if possible add on links to good usefull sites such as Vganapathy. Keep up the good work. We in the power generation business. Feel free to visit http://www.malakoff.com.my/
HAIRUL SALEHIN
Pantai remis, Perak MALAYSIA - Friday, November 24, 2000 at 09:39:44 (PST)

Retiring from the Navy soon. Great site for industry information.
Randall Perryman
Kennesaw, GA USA - Wednesday, November 22, 2000 at 17:26:40 (PST)

Year-end greetings from the restoration crew of the SS RED OAK VICTORY, Richmond, CA. The last Richmond Kaiser steam-ship.
G. R. Souza
San Rafael, California USA - Sunday, November 19, 2000 at 16:35:56 (PST)

Please features on boiler operation/maintenance and state of the art instrumentation
Janu P. Encarnacion PME
Iligan City, Philippines - Saturday, November 18, 2000 at 22:38:20 (PST)

What a broad & wonderful screed on technical aspects relating to boiler plant (from an old Energy Consultant).
Harry Bennett
Melbourne, Victoria Australia - Saturday, November 18, 2000 at 18:18:19 (PST)

EXCELLENT
GARY
- Friday, November 10, 2000 at 19:28:20 (PST)

Very Interesting, however there is no mention of water treatment for these units. Need any assistance?
Virginia Gibson
Burlingame, CA USA - Thursday, November 09, 2000 at 00:05:09 (PST)

Could you please tell me what USS stands for with regards to a ship's name. Thank you
bette b
San Bdno., CA USA - Wednesday, November 08, 2000 at 21:26:44 (PST)

Great Site!! I've been a boiler/burner tech for 20+ years and stumbled across this web-site. Lets you know that you are not alone out there
Keith E. Fortner
Omaha, NE USA - Monday, November 06, 2000 at 13:16:07 (PST)

Nice website. I will be back for sure.
Bob Maiden
Huntsville, AL USA - Saturday, November 04, 2000 at 19:06:17 (PST)

looking for used boilers with CRN numbers hi psi
calvin madsen/ prime boiler ltd
red deer, alberta t4p-1a7 canada - Tuesday, October 31, 2000 at 13:04:40 (PST)

I think you have a great site. I would like stationary engineers from North Carolina to contact me please.
Ray Hogan
Dartmouth, Nova Scotia Canada - Monday, October 30, 2000 at 10:26:58 (PST)

I thinkyou have an excellent site. I would like stationary engineers from North Carolina to contact me please. Thank you
Ray Hogan
Dartmouth, Nova Scotia Canada - Monday, October 30, 2000 at 10:16:57 (PST)

While I haven't yet used the site for buiness, I'am sure that we will in the near future because of common fields in the trades.Your site appears, at first glance, to be well thought out and organised.I look forward to extracting some information from it ! Thanks, Steve with Combustion Engineering.
Steve Backeberg
Tacoma, Wa. U.S.A. - Saturday, October 28, 2000 at 17:53:31 (PDT)

I consider it a very useful site. I am looking forward the address of the authority conducting Stationary Engineer's examination in Houston,Tx. USA Further if any one can help in ontario class 4 Stationary Engineer's examination, it will be appreciated.
Muhammad Khurshid Alam
Toronto, Ontario Canada - Friday, October 27, 2000 at 13:39:21 (PDT)

HAVE A BLESS AND WONDERFUL DAY....
M. HERNAN ELIZONDO
TULSA, OKLAHOMA USA - Thursday, October 26, 2000 at 14:30:09 (PDT)

I appreciated the effort you make this site a remarkable one. Service engineer Coffin turbo pump Asia
Lee Vincent
Singapore, Singapore Singapore - Saturday, October 21, 2000 at 02:29:25 (PDT)

I'm very glad I found this very informative site. Thank you.
Lawrence Larsen
Irvine, Kentucky USA - Wednesday, October 18, 2000 at 11:44:18 (PDT)

Would like to know how to get lists on all licensed or cetified Boiler Operators in each State?
Barry Huffman
Memphis, Tennessee United States - Saturday, October 07, 2000 at 18:19:49 (PDT)

I am a 1st Grade Engineer with the Maryland State DLLR.I find this site very interested.
Roy D.Hibbert,Sr.
Adelphi, MD USA - Friday, September 29, 2000 at 17:09:02 (PDT)

Hello from yellostone. Im 3rd class operator. I operate 26 Cleaver brooks boilers. Just,found your web site.
Chuck McNab
Yellowstone Nat. Park, Wy. USA - Thursday, September 28, 2000 at 10:48:59 (PDT)

Presently a second class stationary steam engineer in North Berwick, Maine with about nine years experience. Tried your site and thought it was very informative and enjoyable to use.
Thomas M. Drouin
Westbrook, Maine U.S.A. - Wednesday, September 27, 2000 at 04:49:16 (PDT)

I like this site. Alot of good information
Dave Thompson
Omaha, Nebraska USA - Sunday, September 17, 2000 at 13:13:10 (PDT)

An interesting site.
Clive Walter
Jakarta, West Java Indonesia - Thursday, September 14, 2000 at 18:03:37 (PDT)

I am Energy Conversion' student at Bandung Institute Technologies (Master degree). I really interest in boiler system and its control.
Hidayat Ginting
Bandung, Jawa Barat Indonesia - Saturday, September 02, 2000 at 02:04:59 (PDT)

possibly looking for a new boiler as a kicker.
Jeff Berge
Appleton, Wisconsin United States - Friday, September 01, 2000 at 06:56:31 (PDT)

Great site - This is the way to do it.
Christian Preuthun Pedersen
Aalborg, Denmark - Wednesday, August 23, 2000 at 23:59:45 (PDT)

I worked for 32-year on fire tube and water tube boilers. At present attached with Pakistan Oilfields, P.O. Morgah Rawalpindi, Pakistan. Remained inspector of boilers for 17 years in Uganda, East Africa. I found this site very interesting and informative. All are welcome to contact me for any information.
Shakeel Ahmed Qureshi
Islamabad, Federal Area Pakistan - Wednesday, August 23, 2000 at 22:49:46 (PDT)

A very resourceful site.
Lars Josefsson
Karlshamn, Sweden - Wednesday, August 23, 2000 at 00:11:41 (PDT)

Not a bad site at all, found it by accident but I'll surely bookmark it for reference in the future. I'm a 1st class Power Engineer and worked as Utilities Supervisor 15 years in refining with Texaco/Ultramar and currently Chief Engineer at large University complex.
Ross Farrant
Halifax, Nova Scotia Canada - Tuesday, August 22, 2000 at 06:05:14 (PDT)

Nice Web ! hope we can share many information about steam/boiler
RIFKI EKADJATI
SURABAYA, EAST JAVA INDONESIA - Thursday, August 17, 2000 at 20:04:36 (PDT)

R.F. MacDonald Co. Hayward, CA--seeking experienced only
Terry
Suisun City, Ca USA - Wednesday, August 16, 2000 at 19:28:38 (PDT)

R.F. MacDonald Company
Terry Bennett
Suisun City, CA USA - Wednesday, August 16, 2000 at 14:40:50 (PDT)

I requird all informations regarding steam boilers
Anwar Ali
karachi, sindh pakistan - Sunday, August 06, 2000 at 04:29:46 (PDT)

nice site! good luck!!
Mike
nyc, ny usa - Saturday, July 29, 2000 at 05:52:39 (PDT)

I am a safety engineer. I was recently making an inspection in Uruguay and noted that one boiler has one only low water level control Question is: Shall all boilers have a back up low water level cotrol system, in case the first one fails ?
Manuel Gwiazda
Buenos Aires, DF Argentina - Tuesday, July 25, 2000 at 06:48:51 (PDT)

SOY ING. MECANICO CON POCA EXPERIENCIA EN EL AREA, FAVOR MANDAR INFORMACION SOBRE GENERADORES DE ENERGIA, SUMINISTRO DE COMBUSTIBLE, INSTRUMENTACION
ENRIQUE MORENO ULLOA
TRUJILLO, LA LIBERTAD PERU - Monday, July 24, 2000 at 19:16:58 (PDT)

Good Site. Useful Info. I hold a D.C. First Class Steam Engineer's License and am currently working as a Shift Supervisor at a 3-unit 570 MW coal-fired power plant for Potomac Electric Power Company.
Mark Hammer
Dickerson, MD USA - Sunday, July 23, 2000 at 09:07:41 (PDT)

One of the most resourceful sites I've seen on the WEB.
David J. Calo
E. Hanover, NJ USA - Friday, July 21, 2000 at 11:26:02 (PDT)

Great site! I have a 150 hp like new boiler to sell. Any help would be appreciated. Robert
Robert Weiss
Healdsburg, CA USA - Friday, July 21, 2000 at 07:20:17 (PDT)

MA. THIRD CLASS STATIONARY ENGINEER WHO WORKS FOR SMALL COGEN IN BOSTON AREA/ GREAT SITE
d stevens
v ipswich, ma usa - Thursday, July 06, 2000 at 16:10:53 (PDT)

Oversee a 45MW Co-Gen Station for the University of Michigan
George Gooch
Ann Arbor, Michigan USA - Monday, July 03, 2000 at 05:36:22 (PDT)

I am a operating engineer. I find this site to be very informative.Keep up the good work.
David Montemarano
Morris Plains, New Jersey U.S.A - Saturday, June 24, 2000 at 20:46:51 (PDT)

I am a retired mechanical engineer. The last 15 years of my career I was responsible for production and distribution of refinery utilities. I am still keeping up by being a freelance consultant on every aspect involving steam and power production and distribution. This site is a revelation.
Raymond De Ravet
Antwerp, Belgium - Tuesday, June 20, 2000 at 14:01:48 (PDT)

I'm a Stationary Engineer 2 Class Steam & 3rd Class Reefer License, and I work in a small COGEN Facility, (1) 14,000HP Gas Turbine, (1) 175,000 lb/hr HRSB & (2) 95,000 lb/hr back up Package Boilers, you have a very Informative Site.
Michael White
Edison, New Jersey USA - Sunday, June 11, 2000 at 02:43:30 (PDT)

I went thur your web site with ease, Everything I checked was very infomative. I have worked on boilers/burners for the past 25 years, and have seen a lot of strange and unusual installations. The company I work for is based in Birmingham Al. Keep up the good work!!!!!!
Bobby C. Tucker Jr.
fultondale, Alabama U.S,A, - Friday, June 09, 2000 at 15:54:13 (PDT)

We are in search of boiler inspectors for various contracts that we have nationwide. If you're looking for extra income and have the expertise, we'd love to hear from you. Thanks Boiler Room
Kathleen Callahan
Bel Air, MD USA - Friday, May 26, 2000 at 06:57:01 (PDT)

I work in New York City at a heating supply house. Good site. Great to see a world of opportunity out there.
Alex Taliana
Westbury, NY USA - Thursday, May 18, 2000 at 18:24:59 (PDT)

I am a chiefegineer on 2 steemers in the archepelago of Stockholm, the name is S/S Storsk�r and S/S Norrsk�r. In 1999 was Storsk�r furnishd with a new boiler, and just now I work with the new instalation of a new boiler on S/S Norrsk�r. The boilers is made at AALBORGS INDUSTREIES and in MY oppingon, they make the Best schotch Boilers in the World.
Leif Runefalk
Andersbo, 740 46 �sterv�la Sweden - Friday, April 28, 2000 at 12:03:15 (PDT)

Requirement of Vapor condenser Thermic Fluid Boiler
Gunvant Nayak
Ahmedabad, Gujarat India - Monday, April 24, 2000 at 01:24:57 (PDT)

Its a great site. a lot info useful,and good looking.
R.c.a. van Triest
STAPHORST, Overijsel Nehterlands ( Holland) - Friday, April 21, 2000 at 08:25:16 (PDT)

pls. add my name to the mailing list. thx. ak
mir ali khan
toronto, ontario canada - Wednesday, April 12, 2000 at 10:07:05 (PDT)

good job
angelo j. sands
missouri city, tx - Tuesday, April 11, 2000 at 19:59:59 (PDT)

hi, i love you all, boiler manufacturers!
dumitriu anghel
constanta, romania - Tuesday, April 04, 2000 at 12:51:49 (PDT)

Top site -very helpfull for advanced boiler queries
rob woodall
Kingaroy, Queensland Australia - Tuesday, March 21, 2000 at 20:24:51 (PST)

REALLY ENJOYED YOUR SITE.I AM APOWER ENGINEER RESTRICTED 4 th CLASS.PLEASE KEEP ME UP TO DATE ABOUT NEWS IN YOUR COMPANY,THANX,MIKE
MICHAEL BUKOWIECKI
MILWAUKEE, WISCONSIN U.S.A. - Saturday, March 18, 2000 at 09:17:46 (PST)

great site!
Jim McCarthy
vancouver, wa usa - Wednesday, March 15, 2000 at 18:35:48 (PST)

Good and helpful site. Does this have KP backing?? Nice link to USMMA. Class of 78.
Ed Baker
Southington, CT USA - Tuesday, March 14, 2000 at 06:13:48 (PST)

Very Powerful and practical way to exchange knowledge and technical experiences.
M. M. Al-Shammari
Saudi Arabia - Monday, March 13, 2000 at 01:30:56 (PST)

site is very helpful thanks
Eric Williams
Lakeland , Fl - Sunday, March 12, 2000 at 20:17:46 (PST)

Lead Engineer East Jefferson General Hospital
Richard Paul Gabriel
Metairie, LA Jefferson - Saturday, March 11, 2000 at 11:58:18 (PST)

I am new to Bolers and their maintenence, I will be here a lot. Thanks for being here.
Jeff Williams
The Dalles, Oregon U.S.A. - Thursday, March 09, 2000 at 19:43:26 (PST)

Excellent resource I am new to the industry and beginning a new job position I thought I would never find anything on boilers!
dean whitfield
AURORA, IL USA - Thursday, March 09, 2000 at 18:53:18 (PST)

Greetings! I am a process research engineer with the Battelle Memorial Institute. I think this site is an excellent resource!
Matthew Schmidt
Columbus, Ohio USA - Tuesday, March 07, 2000 at 14:09:00 (PST)

I have worked in the industry for almost 30 years as operator, inspector and operations supervison. I worked in Boiler Inspection for 19 years and a lot of questions I see in the forum are common questions and I am glad to see this forum grow. I also trained and lectured on boiler safety for 14 years while working in full time positions and the questions I heard are reflective of the forums content. Keep up the Forum.
Carl F. Jones
Anchorage, Alaska USA - Sunday, February 27, 2000 at 11:33:00 (PST)

It is nice to find a informative web site for our industry without someone trying to sell something. I am a water treatment specialist with 12 years experiance. If you have any related questions send me a e-mail. Over all, Great Site
Darren Brazell
Spokane, wa. - Wednesday, February 23, 2000 at 22:29:53 (PST)

The site I found Recently Hope to visit time to time. Nice work for proffessionals
Abid Q Alvi
Karachi-75230, Pakistan - Wednesday, February 16, 2000 at 07:25:16 (PST)

I am consultant of Gas Company of Qingdao City. I am looking a domestic gas hotwater boiler manufacture with superior quality, and then we are planing to be the representative of the company in China
Chen Jiaxin
Qingdao, Shandong Province China - Monday, February 14, 2000 at 05:42:14 (PST)

I'm a vocational instructor teaching boiler operation at some county schools and was looking for any techincal information that I can use and pass on to my students
Joseph L. Czop
Old Bridge, N J USA - Friday, February 11, 2000 at 13:32:57 (PST)

Really gret site! I work as a third class engineer in a Quebec Lumber Mill,and resources like yours are hard to find. Keep up the great work. Rod
R.Meilleur
Davidson, /quebec Canada - Sunday, January 30, 2000 at 22:15:26 (PST)

Great site,May your steam pressure stay up
William Dare
Bennington, Vermont USA - Sunday, January 30, 2000 at 08:28:28 (PST)

very helpful site--thanks!
Melinda
Tucson, AZ USA - Tuesday, January 18, 2000 at 14:11:32 (PST)

i'm a johnson controls operator that in joys you'r web page.
barry a bowe
richland, washington benton - Tuesday, January 18, 2000 at 02:27:48 (PST)

i'm a johnson controls operator that in joys joys you'r web page.
barry a bowe
richland, washington benton - Tuesday, January 18, 2000 at 02:27:12 (PST)

This is an excellent web address to see, specially for us the Engineers.
Roque Redondo
Caguas, Puerto Rico - Sunday, January 16, 2000 at 09:11:25 (PST)

A nice site and hopefully usefull
Janne
Kalmar, Smaland Sweden - Thursday, January 13, 2000 at 10:02:45 (PST)

I think it will be very helply to me because I am trying to find information of unsteady i boilers.
I�aki
Bilbao, Bizkaia - Wednesday, December 22, 1999 at 03:51:20 (PST)

great site, very helpful
Mario
milano, italy italy - Tuesday, December 21, 1999 at 08:13:58 (PST)

We are looking a good boiler manufacturer. We want to sale their product in our country.
Gunvant Nayak
Ahmedabad - 382325, Gujarat India - Tuesday, December 21, 1999 at 06:47:57 (PST)

Glad we found you! We need help with our Electric Steam Boiler and located some sources on your bulletin board. Would be interested in corresponding with other electric boiler users.
David H. Hauser
Clemmons, North Carolina USA - Monday, December 20, 1999 at 18:08:30 (PST)

Hello, I work at Eastern Washington University's central plant. This steam forum is an excellent way of getting answers to questions & really good information, keep it up, thanks.
Kevin Beckwith
Spokane, Wa. USA - Tuesday, December 07, 1999 at 09:39:13 (PST)

PLANT OPERATOR AT LOCAL UNVERSITY
R.A.MORGAN
CHENEY, WASH. U.S.A. - Tuesday, December 07, 1999 at 01:52:57 (PST)

a very interesting site as i use a KMW [385hp],200hp matheson,waste wood firedsystem to heat my greenhouses. for back up ,cb250 and cb300 light oil,all low pressure steam. i was actually looking for info. for a steam whistle,where to find or how to build.
peter stokdijk
truro, nova scotia canada - Saturday, December 04, 1999 at 16:48:38 (PST)

WOW!- Just blundered onto this site, and have been enthralled for the last hour & still have not got through it all. It will definately become one of my favourite places to visit. There is just so much information here on the one site- it's incredible
Ian Larcher
Wallerawang, New South Wales Australia - Tuesday, November 30, 1999 at 23:01:01 (PST)

My first time to your wonderful site ... what a great idea! Hope you have other steam hobbiests that frequent your pages too ... like in Live Steam Locomotives Please feel free to visit our steam locomotive website at http://www.dochemp.com/bigtrains.html
Doc Hemp
Redding , CA USA - Saturday, November 27, 1999 at 10:11:23 (PST)

Web site is great. Season Greetings 1A\E Bubba AMSEA. Cape Jacob
Ray(Bubba)Culpepper
Mobile, Alabama USA - Monday, November 22, 1999 at 22:00:43 (PST)

I found this site very interesting. do you know of any burner site like this one?
Mike Alconada
Taunton, MA 02780 USA - Monday, November 22, 1999 at 16:49:08 (PST)

Interested in technical service bulletins, other late breaking news.
Glenn Miller
Cairo, GA USA - Saturday, November 20, 1999 at 16:09:47 (PST)

a good learners guide
ramasamy
fahaheel, kuwait kuwait - Friday, November 19, 1999 at 14:39:47 (PST)

a good learners guide
ramasamy
fahaheel, kuwait kuwait - Friday, November 19, 1999 at 14:39:15 (PST)

Good site
Don Frey
St. Paul, Minnesota U.S.A. - Friday, November 19, 1999 at 09:46:32 (PST)

I read a lot of good scoop and I was inpressed with the knowledge contained on this website. I have added this to my favorite places. The reason that I stopped by was to find a down and dirty conversion factor for fuel oil, from pounds to gallons. It would be nice to have this available on line for review. Thanks.
Michael A. Och
Arlington, VA USA - Wednesday, November 17, 1999 at 10:12:11 (PST)

Interesting.
Arthur Magnussen
Vennesla, Norway - Wednesday, November 17, 1999 at 00:00:52 (PST)

I am a finance major student, but right now I am doing an internship in a manufacturing company. I am reading some company information but I do not know the meaning of: flue gas; and the difference between vapor and steam? If anyone can please help me with this concepts. Thanks. My e-mail is cas05271@hotmail.com
Carlos
Atlanta, Georgia USA - Monday, November 15, 1999 at 09:05:13 (PST)

Nice page, found it by chance
Leland H. Dusharm
Phoenix, New York USA - Thursday, November 11, 1999 at 16:37:04 (PST)

I like the concept of your web page,it's nice to contact other steam plant operators.
Bryn Collingwood
Calgary, Alberta Canada - Thursday, November 11, 1999 at 10:43:34 (PST)

Searching for information on sources for boiler cement.
John McKeone
Dexter, MI USA - Tuesday, November 09, 1999 at 11:52:43 (PST)

Nice site hope to pick up some info from this site, and I'm sure I will.
Wade Robinson
Gouldsboro, Maine USA - Friday, November 05, 1999 at 09:03:22 (PST)

Hey nice site. I found some of the information very informative. I am a student at Penn State Fayette Campus, and I am in the BEST engineering program. If you would have any free info on how to size boilers. I'm sure myself and my fellow students would be grateful.
LeRoy Glover
Bruceton Mills, West Virginia United States - Thursday, October 28, 1999 at 04:50:16 (PDT)

FOUND YOU ON CICIENGINEERING LINK THANKS
ART JONES
HENDERSON, KY HENDERSON - Monday, October 25, 1999 at 09:47:48 (PDT)

I will come back to this site often to see new updates. It is nice to have a good place to get information for our field. Thanks
Warren Spears
Alexandria, Louisian - Friday, October 01, 1999 at 18:09:28 (PDT)

I am a 3rd class steam engineer for the state of ohio. i am employed by a food mfg. facility in sidney,ohio responsible for all steam and hotwater processes and dedicated to food safety and safety in the boiler rooms.
michael d. windham
anna, ohio u.s. - Friday, October 01, 1999 at 02:10:55 (PDT)

Grate looking site, I put a bookmark here and vwill be back often.
Vester F. Clay
Katy, Texas U.S.A. - Saturday, September 25, 1999 at 03:39:45 (PDT)

I manage a hospital boiler house and maintain steam systems. This site was recommended by my Frederickseal Rep. I have found it interesting and a real service to the industry.
Harold Strope
Albany, New York U.S.A. - Friday, September 24, 1999 at 07:00:27 (PDT)

I NEED CONTACT WITH BOILER TUBE EXPANDERS MANUFACTURERS, PLEASE HELP ME!
LUIS ALARCON
QUITO, PICHINCHA ECUADOR - Friday, September 17, 1999 at 17:56:48 (PDT)

cery tidy and easy to reach information center for boiler engineers. congragulations!
murat onur
istanbul, turkey - Friday, September 17, 1999 at 04:13:55 (PDT)

Need to locate a source for seamless boiler tube, SA178A that can ship to our forwarder in Miami, FL. Normally we repair several boilers each year and we use 2", 2 1/2" and 3" boiler tube.
Donald Smith
El Valle, Cocle Panama - Thursday, September 16, 1999 at 18:14:21 (PDT)

wow ,great web site. we are into Marine (as in big ships)and Industrial boiler & engine room control. See our site www.grbowler.com . This site is now in my favorites list.
GARY BOWLER
ONTARIO, NEW YORK USA - Tuesday, August 24, 1999 at 12:24:49 (PDT)

KEEP THE STACKS CLEAR & THE FIRES LIT
J.CERMAK
STORRS, CONNECTICUT U.S.A. - Thursday, August 19, 1999 at 10:58:09 (PDT)

Vince I Found it. There is a lot here! John Denk
John M. Denk
Pittsburgh, PA Alleghney - Tuesday, August 17, 1999 at 10:45:02 (PDT)

Very nice . I saw a lot of comments and folks in the listing having feed water for blood and steam for a filler and lifting safteys ever once in a while being in the business for 40 years it is nice to have single sourse to look at first
James Window
Baton Rouge, louisiana USA - Thursday, August 12, 1999 at 12:05:24 (PDT)

dear sirs, I would like to thank You for so beutiful page where I can find a lot of info material about heating equipment with which I deal in Lithuania. Sincerely Your Audrius Nairanauskas
Audrius Nairanauskas
Vilnius, Lithuania - Wednesday, August 11, 1999 at 14:34:32 (PDT)

i need information about boiler manufacturing companies and technical data of boilers and models
anwar ali
karachi, sindh pakistan - Tuesday, August 10, 1999 at 11:00:17 (PDT)

I wanna know about the boilers as we have a topic in our seminars as "trends in boilers"
Kedar Sathe
Nagpur, Maharashtra India - Monday, July 26, 1999 at 07:59:17 (PDT)

As Editor/USA for the International Stationary Steam Engine Society, I am constantly on the lookout for good used boilers for museum sites. This site looks like a winner.
Robert E. Lindquist
Nescopeck, Pennsylvania Luzerne - Wednesday, July 07, 1999 at 15:46:19 (PDT)

Just looking around need some boilers looks as this is the place to shop. I served in the USN as a BT 68-70 USS Colonial Looking for old BT buddies I'm still steaming 29 years later.
Danny Nicholson
Texarkana , TX USA - Wednesday, June 30, 1999 at 18:14:44 (PDT)

I have just added you to my list of favorites and plan on visiting often. This forum/ bulletin board was sorely needed and will be very beneficial.Keep up the good work.
Roger Link c/o Link Iron WorksInc
Hickory, NC USA - Saturday, June 19, 1999 at 12:41:50 (PDT)

I represent the Albany Office of Joseph R. Loring and Associates Inc. We do quite a bit of boiler room and plant design in the NYC Metor Area. The Albany Office is new. Keep up the good information.
Clif Wassel
Albany, New York USA - Thursday, June 17, 1999 at 05:36:50 (PDT)

Tour to your website gives complete information for companies to draw attention towards your company. As a Marketing & Sales Regional Incharge of a Boiler Manufacturing company, I am impressed. I am wondering whether you have implemented SAP,ERP package which provides very conveinant enviornment for working especially variant configuration - which makes you to react customer's choice for auxillaries of boilers like feedpump.valves, intrumentation,etc., all these variants are configured and help marketing/sales department. Good luck
Ravi Soma Kumar P.
Houston, Texas USA - Saturday, June 05, 1999 at 13:04:50 (PDT)

Greetings from the restoration crew of the RED OAK VICTORY. This is the last ship afloat that was built in the Kaiser Shipyards in Richmond, Ca. The ship was removed from the Reserve Fleet, Susuin Bay in Sept. 1998 and is being restored at its place of birth in Richmond. The boilers and turbines are in good condition and will be pressurized after dry-docking. The ship, now owned by the Richmond Museum of History, will be restored to its 1944 state including its fore and aft gun tubs . Volunteer assistance, especially in the Engineering Dept, will be deeply appreciated.
S.S. Red Oak Victory
Richmond, California USA - Tuesday, June 01, 1999 at 10:35:07 (PDT)

This looks like a good forum. Thank you for making it available.
Paul V. Kurilecz, M.S., P.E.
Dallas, Texas USA - Monday, May 17, 1999 at 21:24:48 (PDT)

Very Interesting, will visit again
Gilbert Jessop
Port Elizabeth, Eastern Cape South Africa - Friday, May 14, 1999 at 14:30:22 (PDT)

Good site to find solutions to all your steam related problems.
Bob Jones
Louisville, Kentucky USA - Wednesday, May 05, 1999 at 20:30:58 (PDT)

We will look forward to advertising our equipment with your company
Jim Jensen
Bountiful, Utah USA - Tuesday, May 04, 1999 at 13:53:03 (PDT)

Agradecer� puedan enviarme informaci�n acerca de calderos equipos y accesorios con especificaciones t�cnicas y precios, as� como informaci�n acerca de cursos y literatura t�cnica Alejandro Ballarta.
Alejandro Ballarta Mu�oz
Lima, Lima 36 Per� - Monday, May 03, 1999 at 13:15:31 (PDT)

Nice site,I was looking for boiler operation info & found it HERE. I'll be back thanks,terry.
Terry Powers
Lewis, KS USA - Tuesday, April 20, 1999 at 06:12:41 (PDT)

Your site is every bit as impressive as you described at our meeting.
Mitchell J. Lautner
San Diego , CA USA - Monday, April 19, 1999 at 10:09:47 (PDT)

Engineering
Todd bruso
Bennington, Vermont United states - Sunday, March 28, 1999 at 18:22:55 (PST)

Thanks. Appreciate the site. Vern Ellis
Vern Ellis
Fresno, California USA - Friday, March 26, 1999 at 23:29:22 (PST)

Hello, Have a very nice day.
Wes Rohrer
Pittsburgh, PA USA - Monday, March 15, 1999 at 10:52:47 (PST)

Interesting page I'll Visit again.
Ernest A Ha ll
Sanddwich, MA US - Saturday, February 27, 1999 at 17:50:16 (PST)

Great web site, keep up the good work!
Darrell Spells
Huttig, Ar US - Thursday, February 25, 1999 at 09:49:33 (PST)

We are considering solar heated, steam power (10 hp) o run a generator. Open to your suggestions. And prices on your boilers.
Chard Ari
Louisa , Virginia usa - Sunday, February 21, 1999 at 10:00:49 (PST)

Just bought two new Cleaver Brooks boilers. Might need repair parts later. Can you help us.
Steve Fetter
Belle Chasse, LA USA - Thursday, February 11, 1999 at 06:57:29 (PST)

just starting to see this new world. Looking for small VFT boiler for 33' steam launch. Engine is a Navy G. So far no such luck Thank you
Angus McCamy
Kingston, NY usa - Tuesday, February 09, 1999 at 08:45:39 (PST)

Vern Ellis was very helpful with my questions, Great site!! Thanks for the help Vern!
Craig Pettit
Portland, OR USA - Monday, January 11, 1999 at 17:54:57 (PST)

Your add in internet is very good.keep it up
Bill Balwant Dhinsa
Vancouver Ph. 604-323-1400.Fax.604-327-3525, B.C Canada - Monday, January 11, 1999 at 00:10:04 (PST)

Great site! I hope to visit again, and look a little deeper.
John Moore
Ogden, Utah USA - Friday, December 11, 1998 at 19:14:33 (PST)

Looking for electrocstatic precip for wood fired boilers (3) at 40000 acfm at 400 deg F
Gene Adams PE
Mooresville, NC USA - Thursday, December 10, 1998 at 18:26:31 (PST)

very nice page,full of products and information that can be usefull to many people
Donald E. Fenstermacher Jr.
Hatfield, PA USA - Saturday, December 05, 1998 at 22:41:20 (PST)

I looked for finned AlBrs tubes, finned with Cu . Used in ship coolers Regards St�le Sanne
St�le Sanne
OSLO NORWAY - Monday, November 30, 1998 at 15:56:27 (PST)

We have recently expanded into the Baltimore area.
Bradford White
Baltimore, Maryland usa - Monday, November 30, 1998 at 11:20:31 (PST)

Return to the Boiler Room Home Page

Information on the Boiler Room