[an error occurred while processing this directive]
Posted by tom stanton on January 22, 2013 at 15:50:51:
In Reply to: Converting 150 psi boiler to 15 psi (low pressure) posted by Peter on November 07, 2013 at 14:39:22:
:what someone told you is correct about converting from HP to LP. To change the 1 inch pipe connection to a 1.5 inch connection you need to hire a weld repair company with a NB "R" Stamp. They can do the work. Be careful because if there are no other 1.5 inch connections on the boiler this would be called an alteration and will cost a bit more money.
Post a Followup