[an error occurred while processing this directive]
Posted by Rob on January 05, 2009 at 13:42:25:
Brand new guy here and not completely knowledgeable with hot water boiler systems.
I have an old W-Mc Boiler with a Honeywell relay (L8124L). There are 3 screws on the relay (TV, T, Z). I have a wire coming off of TV and one coming off of Z and these are going to my White Rogers 1311 Zone valves.
On the W-R valve there are slots 1-6. The TV wire hooks up to slot 1 and the Z wire hooks to slot 2. Slots 4-6 hook up to the thermostat in each zone area. There is nothing hooking into the slot marked "3".
When I look at wiring diagrams for new zone valves (I want to replace mine with new Taco) they show wires coming from a transformer. I don't have this.
Am I to take it that my power is coming from the wires coming off the boiler (TV and Z)? If so can anyone tell me how to wire the new Taco valves?
Post a Followup