[an error occurred while processing this directive]
Posted by Glen on July 27, 2004 at 06:12:41:
I have a 4 boiler system here at our test facility that has a diesel ring main with two gear pumps (duty & stand-by) providing fuel to the burners. These are getting old/unreliable and we are looking to replace them so I was wondering if a Tigerloop system would be a good option. The maximum required flowrate would be approx 80 gallons per hour if we were to start all 4 up at the same time, but the split is as follows: 1 @ 32 g/hr (70 g/hr during start-up), 1 @ 5 g/hr and 2 @ 1 g/hr. If anyone has any suggestions, I'd really appreciate it.
Many thanks from Bonny Scotland,
Post a Followup