[an error occurred while processing this directive]
Posted by Ted Kirton on April 26, 2005 at 18:29:30:
I am having problems with my hot water.
The central heating is working ok but the hot water will only fill up about an eighth of a bath before it trips out and i have to press the red reset button to light it up again.
The water pressure seems ok and i have tried running it with the temp dial turned to the setting 1 but still it trips.
I am running at 1.5 bar is this ok or should it be more.
Any help would be greatfully appreciated an if it needs a clean out please tell me how and which bits i need to target please.
Thanks