[an error occurred while processing this directive]
Posted by Robert Eddy on March 19, 2005 at 23:11:55:
We have a CROWN Aruba series Model ABF-SPD (we
think) and turned off the boiler, shut the water valve (supply) off, then drained the system. Weve replaced a
radiator. we turned the water
back on, its not filling up. the
power is still in the off position
and all the water valves are open
at the boiler. The air valves are all
closed at the radiators. The water
supply lines at the radiators are
all open. Water is not filling up tp
the radiators. So we cant bleed
them. Should we turn the power
on and set the thermostat to the
lowest position?
Help please!
Rob