[an error occurred while processing this directive]
Posted by HeatPro on January 02, 2005 at 18:22:01:
In Reply to: Re: Bell & Gossett versus Taco posted by Steve Garson on January 01, 2005 at 20:25:05:
As all your runs are relatively small in carrying water and run through 3/4 tubing, the Taco circulators would do very well. B&G100's are for larger water flows through larger pipe, though it won't hurt to use them on smaller tubing. To see what flows to expect, see:
http://64.226.150.132/hydronic/cir/start.htm