[an error occurred while processing this directive]

Re: High Pressure Steam System Feed Water Heater


[ Follow Ups ] [ Post Followup ] [ The GOSTEAM.COM Industrial Equipment Forum ] [ FAQ ]

Posted by Shaikh Zulqarnane Haider on May 19, 2004 at 23:11:08:

In Reply to: High Pressure Steam System Feed Water Heater posted by C. Renaud on March 11, 2003 at 13:49:37:

Most Urgent Matter kindly provide us the complete information of the following items including RATE LIST & EARLYEST DELIVARY TIME


Subject: Supply, Installation, Testing and Commissioning of High Pressure Feed Water Heater
No.5 Along with Complete Level Control System for Unit No.3, BQPS. On Turnkey Basis
(Rehabilitation of Unit No. 3 at BQPS)

One Complete High Pressure Heater #5 along with Complete Level Control System to be Procured for Unit –3 BQPS. The detail and Specification of the Existing Heater installed at Unit –3 ,BQPS, are given below:

Type : Surface
Installation : Vertical
Surface area (Eff.) : 564 m2
Surface area (Gross) : 648 m2
Steam Intel Size : 10” dia (Sch 30)
Steam Outlet Size (Condensate) : 6” dia (Sch 40)
Feed Water Intel Size : 355.6 mm Ö
Feed Water Outletr Size : 355.6 mm Ö x 253.3
Inlet Steam Temperature : 420
Outlet Condensate (Drip) Temperature : 180.32
Inlet Feed Water Temperature : 174.8
Outlet Feed Water Temperature : 197.9
Operating Pressure (Shell Side) : 14.6 barg
Operation Pressure (Tube Side) : 176.52 barg
Total Steam Intel Flow (Shell Side) : 22437 Kg/h (steam) and
56541 kg/hr (condensate)

Total F.W inlet Flow (Tube Side) : 645009 Kg/hr
No. of passes (Shell Side) : 01
No. of Passes (Tube Side) : 02
No. of Tube and size : 700
19x 2.5 mm

Material of Tubes : A556-02/209
Shell Size : 1305 x 15 mm
Shell Material : A 516 – 70
Shell Skirt Size : 1315 x 20
Shell Skirt Material : A 387 Cr 2
Channel Size : 1460 x 105 mm
Channel Material : A516-70
Tube Sheet Size : 1460 x 400 mm
Tube Sheet Material : A 266-2
Baffles Size (Thickness) : 15 & 6 mm
Baffles Material : Carbon Steel
Impingement Plates Material : Material 13% Chromium Steel
Make (Exiting) : M/s ANSALDO
Componenti, ITALY
Total length 9100 mm

Hope to have your reply soon.

My Regards
Sheikh Zulqarnan Haider
Purchase Department
Citoh Company Limited



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:


[ Follow Ups ] [ Post Followup ] [ The GOSTEAM.COM Industrial Equipment Forum ] [ FAQ ]